Ah! Yes, now it works :-)
My, umm, testing verifies that using the RST pad can in reality lock the sequence at step 0...
Working great now! Love my new toy!
thanks again Ken for such wonderful boards :-)
Drew
Drew
To: cgs_synth@yahoogroups.com
From: cgs_synth@yahoogroups.com
Date: Sat, 26 Sep 2015 09:12:03 +1000
Subject: Re: [cgs_synth] CGS89 x2
From: cgs_synth@yahoogroups.com
Date: Sat, 26 Sep 2015 09:12:03 +1000
Subject: Re: [cgs_synth] CGS89 x2
RSP. The other would in theory lock the sequence at step 0.
KenOn Sat, Sep 26, 2015 at 2:07 AM, Andrew oozitron@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:Argg... that's exactly what I've done and it's still wacked...Should I be using the RST or the RSP pad for the reset wire?DrewTo: cgs_synth@yahoogroups.com
From: cgs_synth@yahoogroups.com
Date: Fri, 25 Sep 2015 12:57:14 +1000
Subject: Re: [cgs_synth] CGS89 x2
step 9 goes to the sequencer's own hold, an the other unit's reset, and vice versa. both get the same clock.On Fri, Sep 25, 2015 at 12:20 PM, Andrew oozitron@... [cgs_synth] <cgs_synth@yahoogroups.com> wrote:Is it possible to join two CGS89 Gate Sequencers to make a 16 step unit?I just want a Clock In and a Reset button, no need for length controls or reset jacks for this project.I have two CGS89s built, but I can't figure out how to wire them into a dedicated 16 step.I connected the Step9 Out of each one to the other's Reset In, and fed the clock to both, but they both run at the same time. I connected Step9 Out of each to it's own Hold In, but that didn't help.Is it possible to do this? And if so how the hell do you wire it?thanks! Drew
--
--