Would you be willing to post photos of how you accomplished cutting the slots so accurately with your router and jig? I had assumed this would be impossible to do without professional level equipment.
~Terry
~Terry
--- In cgs_synth@yahoogroups.com, "adematteo" <adematteo@...> wrote:
>
>
> Hi Terry,
> I did do the front panel.It's made out of birch plywood that's 1/8" thick.I was planning on doing it in aluminum but got a bit nervous about routing out the aluminum so tried it with the wood first to see if the jig i made was working correctly and realized once i mounted the sliders it provided enough strength so just went with it.
>
> Thanks for the nice replies guys !
>
>
> --- In cgs_synth@yahoogroups.com, "xiphiguy@" <xiphiguy@> wrote:
> >
> > The front panel looks very nice! Did you do that part yourself?
> > ~Terry
> >
> > --- In cgs_synth@yahoogroups.com, "adematteo" <adematteo@> wrote:
> > >
> > >
> > > Well, i built it and for anyone interested i put i pic up in the photo's section.http://groups.yahoo.com/group/cgs_synth/photos/album/1538675616/pic/1794994871/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
> > >
> > > Thanks so much Ken 1) for doing these boards and 2) for your suggestion of doing 2 separate controls for each band,you can create some really cool imaging in the stereo field.
> >
>