Cgs synth

Hi Ken

Sequence will not jump to Step 6 when Button 6 is pressed.

Here's what else i found :

When the Seq is first powered up without anything patched ; step 6 is constantly lit.


When something is patched to 'down' input (in this case the %2 out of the Pulse Divider) , the sequence always starts from Step 6.

Stephen


________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Tuesday, December 6, 2011 5:34 PM
Subject: Re: [cgs_synth] Sequencer Step 6 HOLD not working



Does it cause the sequence to jump to step 6 when pressed?
If not, you have a bad button, a fault with one of the diodes it feeds, or a
bad connection somewhere areound that area.

Ken

>Hi Ken/All
>
>I built the SWAMP panel and have found recently that the Step no 6

push button momentary switch will not halt the sequence when held down.

>
>All the other push button momentary switches do halt the sequence.
>
>This fault does not affect the sequencer's normal operation when being clocked.
>
>regards
>
>Stephen
>
>[Non-text portions of this message have been removed]
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>




[Non-text portions of this message have been removed]