Go ahead. I do hope it is different. I misplaced the code ages ago.
From http://web.archive.org/web/20030402020953/www.cgs.synth.net/pcb/index.html
*CGS02_R1. This wavetable ROM is a custom wave table of 4 banks of 8
waveforms. (NOT the Digisound wavetable) that I have created. I'm not sure
of the origins of the waves, as I prepared the prototype ROM some time ago.
Some may have been modified from the PPG. Some are definitely custom. All
wave forms are 64 step. They are supplied on a second-hand (used) 2716. Each
ROM has been tested in my own wavetable module. The price covers the cost of
the device (yes, I had to purchase them) and the amount of time I have to
stuff around to actually burn them. The banks in these are a subset of the
CGS02_R2, and the actual banks present may vary between ROMs. Lucky dip!
There are only a limited number of these available. This ROM is NOT
compatible with the Blacet Miniwave.
#CGS02_R2. This wavetable ROM is an expanded version of CGS02_R1, a custom
wave table of 8 banks of 8 waveforms. (NOT the Digisound wavetable) that I
have created. I'm not sure of the origins of the waves, as I prepared the
prototype ROM some time ago. Some may have been modified from the PPG. Some
are definitely custom. All wave forms are 64 step. They are supplied on a
second hand 2732. Each ROM has been tested in my own wavetable module. The
price covers the cost of the device (yes, I had to purchase them) and the
amount of time I have to stuff around to actually burn them. These will only
work in the later CGS02 version of the wave table. There are only a limited
number of these available. This ROM is NOT compatible with the Blacet
Miniwave. Note: The four banks of CGS02_R1 are on this ROM, along with
another four banks.
From http://web.archive.org/web/20041018074514/www.cgs.synth.net/pcb/index.html
*CGS02_R3. This wavetable ROM set consists of two 2764 chips and contains an
array of custom wave tables of 8 banks of 8 waveforms at 128 bytes per wave
that I have created. They are experimental in nature. Some a good, some not
so good. This is the only ROM option available at the moment because I no
longer have access to a ROM burner. The supplied ROMs are SECOND
HAND/RE-USED devices. This ROM is NOT compatible with the Blacet Miniwave.
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
From http://web.archive.org/web/20030402020953/www.cgs.synth.net/pcb/index.html
*CGS02_R1. This wavetable ROM is a custom wave table of 4 banks of 8
waveforms. (NOT the Digisound wavetable) that I have created. I'm not sure
of the origins of the waves, as I prepared the prototype ROM some time ago.
Some may have been modified from the PPG. Some are definitely custom. All
wave forms are 64 step. They are supplied on a second-hand (used) 2716. Each
ROM has been tested in my own wavetable module. The price covers the cost of
the device (yes, I had to purchase them) and the amount of time I have to
stuff around to actually burn them. The banks in these are a subset of the
CGS02_R2, and the actual banks present may vary between ROMs. Lucky dip!
There are only a limited number of these available. This ROM is NOT
compatible with the Blacet Miniwave.
#CGS02_R2. This wavetable ROM is an expanded version of CGS02_R1, a custom
wave table of 8 banks of 8 waveforms. (NOT the Digisound wavetable) that I
have created. I'm not sure of the origins of the waves, as I prepared the
prototype ROM some time ago. Some may have been modified from the PPG. Some
are definitely custom. All wave forms are 64 step. They are supplied on a
second hand 2732. Each ROM has been tested in my own wavetable module. The
price covers the cost of the device (yes, I had to purchase them) and the
amount of time I have to stuff around to actually burn them. These will only
work in the later CGS02 version of the wave table. There are only a limited
number of these available. This ROM is NOT compatible with the Blacet
Miniwave. Note: The four banks of CGS02_R1 are on this ROM, along with
another four banks.
From http://web.archive.org/web/20041018074514/www.cgs.synth.net/pcb/index.html
*CGS02_R3. This wavetable ROM set consists of two 2764 chips and contains an
array of custom wave tables of 8 banks of 8 waveforms at 128 bytes per wave
that I have created. They are experimental in nature. Some a good, some not
so good. This is the only ROM option available at the moment because I no
longer have access to a ROM burner. The supplied ROMs are SECOND
HAND/RE-USED devices. This ROM is NOT compatible with the Blacet Miniwave.
>Ok,thanks._______________________________________________________________________
>
>I was actually asked this by someone who owns the Digisound VCDO and
>was looking for other ROMs. If this one is different, would it be a
>problem
>if I run a copy for him?
>
>
>On 21 mei 2009, at 01:14, sasami@... wrote:
>
>> I think the Digisound one was a red labeled 2716.
>>
>>> I know I have asked this before, but I seem to have misplaced the
>>> reply...
>>>
>>> I have the blue labeled 2716 EPROM and green and red 2764.
>>>
>>> Is the blue labeled one the Digisound ROM?
>>>
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> The CGS Modular Synth home page: http://www.cgs.synth.net/
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>> _______________________________________________________________________
>> Ken Stone sasami@... otherunicorn@...
>> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
>> Australian Miniature Horses & Ponies <http://www.blaze.net.au/
>> ~sasami/>
>>
>>
>>
>> ------------------------------------
>>
>> The CGS Modular Synth home page: http://www.cgs.synth.net/
>> Yahoo! Groups Links
>>
>>
>>
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>