I've finally got my panel process down to something I'm proud of, so I've posted a photo of a few modules I'm working on now.
I usually use the frack format, and leave each circuit to its own panel. (or maybe group a couple of LFO's or EG's)
This time a couple of the modules were too large to fit comfortably in the frac height. I laid out a double height panel, and stuck a bunch of circuits I was working on behind it. It's sort of a super control center.
I'm not sure how I feel about having grouped several modules onto one panel. It made the layout very easy, but goes against the general theme of the rest of the synth.
Here's the new panel
http://groups.yahoo.com/group/cgs_synth/photos/album/333233640/pic/874409600/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc
I usually use the frack format, and leave each circuit to its own panel. (or maybe group a couple of LFO's or EG's)
This time a couple of the modules were too large to fit comfortably in the frac height. I laid out a double height panel, and stuck a bunch of circuits I was working on behind it. It's sort of a super control center.
I'm not sure how I feel about having grouped several modules onto one panel. It made the layout very easy, but goes against the general theme of the rest of the synth.
Here's the new panel
http://groups.yahoo.com/group/cgs_synth/photos/album/333233640/pic/874409600/view?picmode=&mode=tn&order=ordinal&start=1&count=20&dir=asc