Hello everyone.
Sorry to continue the Bi-N-Tic questions. I know there have been a
lot and I've read them all and I still have a few more.
I think I got the whole thing working right but I'm not sure, it's a
weird module (as I'm sure you'll all agree)
The way it is working now it is really two modules, a filter and a
VCO, but I don't see (or hear) much connection between the two.
If I turn the coarse and fine tune knobs all the way down, there is
no oscillator.
Then if I feed a signal in the IN jack i can get some really nice
filter cut sweeps using the BANDWIDTH knob and resonance using the
DAMPER knob. The whole filter sweep is in the last 20% of turn of
the bandwidth knob.
As I turn UP the coarse tune, a square osc, mixes into the signal.
It doesn't effect the filter, it just mixes into the audio path.
When I turn it up almost beyond the audio range, the osc suddenly
cuts off.
Anyway.. maybe this is just how it works? I'd like to talk to
someone who has built one or two of these so that I know if I should
work on it some more.
I really wish there was some kind of CV for filter cut. Am I missing
something?
Thanks!!!!
-pete
Sorry to continue the Bi-N-Tic questions. I know there have been a
lot and I've read them all and I still have a few more.
I think I got the whole thing working right but I'm not sure, it's a
weird module (as I'm sure you'll all agree)
The way it is working now it is really two modules, a filter and a
VCO, but I don't see (or hear) much connection between the two.
If I turn the coarse and fine tune knobs all the way down, there is
no oscillator.
Then if I feed a signal in the IN jack i can get some really nice
filter cut sweeps using the BANDWIDTH knob and resonance using the
DAMPER knob. The whole filter sweep is in the last 20% of turn of
the bandwidth knob.
As I turn UP the coarse tune, a square osc, mixes into the signal.
It doesn't effect the filter, it just mixes into the audio path.
When I turn it up almost beyond the audio range, the osc suddenly
cuts off.
Anyway.. maybe this is just how it works? I'd like to talk to
someone who has built one or two of these so that I know if I should
work on it some more.
I really wish there was some kind of CV for filter cut. Am I missing
something?
Thanks!!!!
-pete
On Nov 28, 2008, at 9:54 PM, casperelectronics wrote:
> Hey Scott,
> I want to add the wave outputs on my bintic filter but I can't find
> the info.
> Do you sell daughter boards/ host schematics for that on your site??
> Thanks!
> -pete
>
>
[Non-text portions of this message have been removed]