Cgs synth

Scott, I just noticed the diagram on your page has a diode before each
gate switch. I did not do this. I just printed your diagram and I'll
try this mod tonight.

http://www.bridechamber.com/bridechamber.com/C%20Event%20Seq_files/ev%20seq%20wire%20diagram-1.jpg

--- In cgs_synth@yahoogroups.com, Jeff Laity <synthetic@...> wrote:
>
>
> On Sep 1, 2008, at 7:37 PM, Jeff Laity wrote:
>
> >
> > On Sep 1, 2008, at 6:49 PM, Scott Deyo wrote:
> >
> >> I assume you have the 1n cap on the pin 15 mod as well? You cut the
> >> trace, inserting the cap into the circuit.
> >>
> >
> > The cap was in the schematic but not in the text. I'll add it.
> >
> >> And are you using -0.6V somewhere? That orange wire near the power?
> >
> > I thought that was 5V. I'm sending it to the reset button and the buss
> > bar for steps. Now that I measure it, it's right around 0V.
> >
> > I need to write a new schematic so I can figure out what's going on
> > with this circuit. I'll try to do that tonight.
> >
>
> Orange line was supposed to be 15V. I switched it and added the cap
> but no change yet.
>