Cgs synth

i've built a couple, splitting the board so it can be "folded" and the
2 halves mounted parallel to the panel. pics:

http://www.fluxmonkey.com/fluxGear.htm
http://www.fluxmonkey.com/photos/TubeVCA_side.jpg
http://www.fluxmonkey.com/photos/tubeVCA_back.jpg

mine are in frac format, but euro would be essentially the same approach.

wonderful module... do not omit the feedback control.

bbob

--- In cgs_synth@yahoogroups.com, "jared" <microcosm11@...> wrote:
>
> Great, thanks Dave!
>
>
>
> So you have yours modded for euro rack? Would you, or anyone else, mind
> sending photos? That would be of great help.
>
>
>
> I can't seem to find any audio clips/examples of either..i'd love to
hear
> what it sounds like before I venture into the build.
>
>
>
> Thanks much,
>
>
>
> jared
>
>
>
> -----Original Message-----
> From: cgs_synth@yahoogroups.com [mailto:cgs_synth@yahoogroups.com]
On Behalf
> Of Dave Kendall
> Sent: Tuesday, August 19, 2008 3:03 AM
> To: cgs_synth@yahoogroups.com
> Subject: Re: [cgs_synth] Tube VCA / Timbral Gate
>
>
>
> It's longer than will fit vertically behind a eurorack module, but can
> be cut in half and the connections re-joined. The pads are already on
> the board for this very purpose.
> I just mounted mine horizontally on an "L" bracket.
>
> PS - Do fit a feedback pot as suggested by Ken on the CGS site. It's
> well worth it ;-)
>
> cheers,
> Dave
>
> On Aug 18, 2008, at 19:57, melodayage wrote:
>
> > hey guys. newbie questions: how big is the pcb of the Tube VCA/Timbral
> > Gate? Will it fit the eurorack format? any potential problems of
> > mouting and running it with a eurorack modules/doepfer power supply?
> >
> > thanks!
> >
> >
> >
> >
>
>
>
>
>
> [Non-text portions of this message have been removed]
>