Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Message

CGS66 PSU

2007-03-28 by Louis van Dompselaar

I'm slightly puzzled by the CGS66 schematic.
Shouldn't the PSU outputs be on the output pins of the
regulators instead of the adjust pin?
The PCB seems to do just that.

Also, the upper 10uF cap on the component layout
appears to me to be the wrong way round.

Louis

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.