Cgs synth

I rewired my Cynare to have the toggle switch and now it sounds MUCH
better! I should have done this when I built it. It makes all the
difference. Now I really love my Cynare. I need another one.

pete

On 1/24/07, Pete <23isgood@...> wrote:
>
> Hey Dave. I will check it out. I hope that's all that's wrong.
>
> thanks
>
> On 1/24/07, david wright < bastardita@...> wrote:
> >
> > pete -
> >
> > check your wiring - you may have some wires too close to each other.
> > i noticed a similiar type of cross talk untill i moved one wire away
> > from
> > some others and it disapeered. i dont remember which wire this was
> > but im going to assume to the vcf input - good luck a great module
> > i have 2 down now :)
> >
> >
> > On Jan 24, 2007, at 4:15 PM, Pete wrote:
> >
> > > I have a bleed through problem with my Cynare. When the filter is
> > > all the
> > > way open I can hear bleed through coming form the "shimmer"
> > > generator. Its
> > > always there. I usually set the filter cutoff to be lower effectively
> > > cutting out the bleed through, and I usually have to adjust the
> > > envelope to
> > > get it just right. If I want to create a cymbal or hi hat sound I
> > > have to
> > > set the envelope pot to the top center position and open up the
> > > filter to
> > > get more of the high end freq's but this also allows the bleed
> > > through to be
> > > heard. Is there a fix for this?
> > >
> > > Thanks
> > > pete
> > >
> > > --
> > > http://www.myspace.com/23isgood
> > >
> > > [Non-text portions of this message have been removed]
> > >
> > >
> > >
> >
> > dave wright
> > www.notbreathing.com
> > bastardita@...
> >
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
> --
> http://www.myspace.com/23isgood
>



--
http://www.myspace.com/23isgood


[Non-text portions of this message have been removed]