Hey Dave. I will check it out. I hope that's all that's wrong.
thanks
thanks
On 1/24/07, david wright <bastardita@...> wrote:
>
> pete -
>
> check your wiring - you may have some wires too close to each other.
> i noticed a similiar type of cross talk untill i moved one wire away
> from
> some others and it disapeered. i dont remember which wire this was
> but im going to assume to the vcf input - good luck a great module
> i have 2 down now :)
>
>
> On Jan 24, 2007, at 4:15 PM, Pete wrote:
>
> > I have a bleed through problem with my Cynare. When the filter is
> > all the
> > way open I can hear bleed through coming form the "shimmer"
> > generator. Its
> > always there. I usually set the filter cutoff to be lower effectively
> > cutting out the bleed through, and I usually have to adjust the
> > envelope to
> > get it just right. If I want to create a cymbal or hi hat sound I
> > have to
> > set the envelope pot to the top center position and open up the
> > filter to
> > get more of the high end freq's but this also allows the bleed
> > through to be
> > heard. Is there a fix for this?
> >
> > Thanks
> > pete
> >
> > --
> > http://www.myspace.com/23isgood
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
>
> dave wright
> www.notbreathing.com
> bastardita@...
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> The CGS Modular Synth home page: http://www.cgs.synth.net/
>
> Yahoo! Groups Links
>
>
>
>
--
http://www.myspace.com/23isgood
[Non-text portions of this message have been removed]