Cgs synth

Mount the switches on the PCB first, but don't solder them, then push the
assembly through the panel etc. When you are happy, solder the switches then.

Ken

>In building the Gate Sequencer switch board, I'm thinking I should mount
>the switches in the front panel (not tightly, just snug), lay that face
>down, then place the PCB onto the switch pins and solder.
>
>Doing this would ensure that things are lined up properly when
>soldered... is this a good way to do it? Or is there a potential
>problem I'm not foreseeing?
>
>thanks!
>Andrew
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>