Re:: Casio PG series guitar synth RAM cards
2019-04-11 by christseen@...
Wow this is exciting!!! I sadly don t own a PG yet this type ov thing is exciting nonetheless.... Maybe other boards with rare cards will see a future like
Messages
Browse messages
Page 1 of 8 · 392 messages matched
Casio PG series guitar synth RAM cards
2019-03-22 by gmeredith1@...
It s been ages since I posted....not much new happening in Casio world. Until today. I found out that the almost impossible to get RA-500 RAM card for the
Re:: PG series synth guitar increased volume output mod
2018-04-29 by gmeredith1@...
No, I didn t have anything suitable on hand at the time, so I just used a range of resistors with alligator clips for quick testing. I started with a 470 ohm
Re:: Re: [casiocollectors] New file uploaded to casiocollectors
2018-04-29 by gmeredith1@...
At the output socket - no - it tweaks the gain to the input of the final mixing op-amp, so the output is left the same.
Re:: PG series synth guitar increased volume output mod
2018-04-29 by mav1960@...
Do you test with a potentiometer in place of resisitors? Only question.
Re: [casiocollectors] New file uploaded to casiocollectors
2018-04-29 by charles copp
any noticeable impedence change with this modification?
PG series synth guitar increased volume output mod
2018-04-29 by gmeredith1@...
Hi all, I ve just uploaded a DIY guide on how to boost the volume of the synth and guitar output from the iPG MIX socket out for the PG380 and other PG models.
New file uploaded to casiocollectors
2018-04-29 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2018-03-20 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /RZ-1
Re: [casiocollectors] Re:: RZ-1 Factory rhythm samples
2018-03-20 by Peter Mavrogeorgis
I’m hoping to have the time to undertake this next week. Peter Mavrogeorgis Co-Owner, Dollhouse Productions Savannah, GA 912-201-3748 office 718-644-0222
Re:: RZ-1 Factory rhythm samples
2018-03-20 by philip@...
Hey everyone, I ve uploaded the scans to the RZ-1 Files directory, they are in cbz file format but if you want to view them as images, just extract the file as
New file uploaded to casiocollectors
2018-03-20 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /RZ-1
Re: [casiocollectors] Re:: RZ-1 Factory rhythm samples
2018-03-16 by charles copp
please do ,,an incomplete manual has been bugging me ....I have a cool pdf to share with youif you desire ...drum patterns
Re:: RZ-1 Factory rhythm samples
2018-03-16 by philip@...
Alright! I ve just found someone to buy an original copy of the manual from, so that should be with me in at most a week. Once it arrives I ll upload some
Re:: RZ-1 Factory rhythm samples
2018-03-15 by gmeredith1@...
The original user manual had the factory patterns written out in a grid format so you could re-program them in case they got lost. Not as good as a memory dump
Re: [casiocollectors] RZ-1 Factory rhythm samples
2018-03-15 by charles copp
im interested to find these too ...so I forget ? the rz wont do initial reset?
RZ-1 Factory rhythm samples
2018-03-15 by philip@...
I ve recently obtained an RZ-1 drum machine, and whilst I ve been able to find a copy of the sound collection tape online on soundcloud
SK1 Powering on issues
2018-01-10 by Joel Saunders
hi all. I recently purchased a circuit bent (patchbay only) SK1 and it is having some temperamental issues. It occasionally turns on fine. it seems to be able
Keys snapping and 3D printing
2017-07-18 by Joel Saunders
Hi all Who else has troubles with keys on their SKs snapping off or getting loose? I ve got 4 keyboards, and two a dodgy. I was wondering if anyone had done
Help with Casio PG 300
2017-03-22 by mav1960@...
I purchase an used Casio PG 300 , wich i recaped in all its pcbs. The guitar turn on display, and i test the hexa pickup with another Casio guitar and works
New song "Minimalia" featuring highly modded SK-8 and SK60
2016-11-27 by gmeredith1@...
Hi everyone, here is our second single Minimalia from our forthcoming album. Lots of minimalist blips! Video features my ultra modded and sample expanded
New band with Casio PG380
2016-11-24 by gmeredith1@...
Hi all, it s been ages since I ve posted here, the forum is pretty quiet lately. I ve been quietly busy though, working on my band s new album, and also
VL-1:German folk song mystery (fake "Unterlanders Heimweh")
2016-03-11 by cowindler01@...
The demo song of Casio VL-1 was listed as German folk song , and since the ROM-Pack RO-551 contained a version as Unterlanders Heimweh it got commonly known
Casio MG 510 bend
2016-03-09 by mav1960@...
Hi all, i have an Casio mg510 midi guitar, and in Normal mode i sometimes erratic the bending, my question is how can adjust if is possibke this, or i must
Re:: Merry Christmas to all Casio Collectors!
2015-12-25 by wizardjonah@...
merry xmas and best wishes from all my casios (cz and xw ) ^^ by the way i m wondering i got a wk110 but didn t get the song book that comes with it, any
RE: [casiocollectors] Merry Christmas to all Casio Collectors!
2015-12-24 by rush2press
Merry Season s Greetings on the Eve of my 33rd year of Casio MT matrimony. :-) -- Keyfish . Sent from my Verizon Wireless 4G LTE smartphone ... From:
Re:: Merry Christmas to all Casio Collectors!
2015-12-24 by kline.music@...
If my 1000p, CZ, VZ, and FZ could talk they would say: Happy Christmas and Merry Holidays to everyone in Casio land. Thank you for sharing your knowledge
Merry Christmas to all Casio Collectors!
2015-12-24 by gmeredith1@...
Merry Christmas to you all - and have a great Casio 2016! Cheers from Graham
Re:: Re: [casiocollectors] Re:: PG-380 schematic
2015-11-01 by D T
Hi Graham, Thanks very much. Unfortunately, my trimmers are up all the way and the string distance is 3mm. Hm… I read one post where a sensitivity issue was
Re:: Re: [casiocollectors] Re:: PG-380 schematic
2015-10-31 by gmeredith1@...
Turn up the sensitivity pots for each string. I found that they have to be almost right up maximum to trigger satisfactorily. Not sure if the pickup can be
Re:: Re: [casiocollectors] Re:: PG-380 schematic
2015-10-31 by sneakyflute@...
Updating here. So, it turned out that the distortion was caused by some crud that had gotten into the pins on one IC on the synth board. After cleaning the
CV / Envelope not working on Casio SK-5
2015-06-25 by Joel Saunders
Hi guys My SK5 only has three of the four voices working - I bought it second hand recently and have started bending/modding it, but I can t work out if this
Re: [casiocollectors] Re:: PG-380 schematic
2015-06-23 by D T
OK!
Re: [casiocollectors] : PG-380 schematic
2015-06-23 by D T
Hey Graham, OK - well, it s reassuring (sort of) to hear that they are supposed to sound similar (some, like ambulance, sound appropriately crazy). There is a
Re:: PG-380 schematic
2015-06-23 by gmeredith1@...
Also, just try playing it through some amp with a line level or mixer desk, just to be sure that the distortion isn t simply overloading the guitar amp input,
Re:: PG-380 schematic
2015-06-23 by gmeredith1@...
The synth sounds are generally louder than the guitar but not heaps louder. I suspect there is a component still to be replaced. Many of the onboard sounds do
Re: [casiocollectors] Re:: PG-380 schematic
2015-06-23 by D T
Hi Graham, I replaced all electrolytics on the surface mount boards. I had to - mine were at the point where if I just touched them, they would fall off (made
Re:: PG-380 schematic
2015-06-23 by gmeredith1@...
The EPROM should be fine, they re bullet proof. What are you running the synth output into? A guitar amp, mixer etc? The volume level out of the synth/guitar
Re: [casiocollectors] : PG-380 schematic
2015-06-22 by D T
So, with the help of Graham’s schematics I was able to find the fault (cracked trace between a resistor and cap for the dead string). I now have six working
Re: [casiocollectors] : PG-380 schematic
2015-06-22 by D T
Hi Graham, Thanks very much for posting these so quickly! With luck, this will get my last voice working again. One other issue I’m having is that, for the
Re:: PG-380 schematic
2015-06-21 by gmeredith1@...
My apologies, I realized that I had the schematics but hadn t uploaded them onto this site. Just put them up now, hope that helps! Cheers, Graham
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio
New file uploaded to casiocollectors
2015-06-21 by casiocollectors@yahoogroups.com.au
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the casiocollectors group. File : /Casio