Casio Collectors

Are you going to ROM your own sounds, or just use the ROM images that are available of TR808/909 and Linn drum sounds for it for this purpose? What chip were you going to do the sampling expansion with?

Cheers, Graham



--- In casiocollectors@yahoogroups.com.au, Kev! <k-vin@...> wrote:
>
> 
> 
> 
> Yeah, I plan on putting in some 1 meg roms for both the internal sounds and sampling and I do have the switching diagram for that, if and when you need it. 
> 
> Keep me in mind if you find a manual, I'll do the same. 
> 
> Thanks, Kev 
> 
> 
> 
> ----- Original Message -----
> From: "Graham" <gmeredith1@...> 
> To: casiocollectors@yahoogroups.com.au 
> Sent: Wednesday, March 6, 2013 5:48:59 PM 
> Subject: [casiocollectors] Re: RZ-1 Bend points? 
> 
> 
> 
> 
> 
> 
> The Circuitbenders.co.uk group have lots of info on RZ bending and also ROM expansion: 
> 
> http://www.circuitbenders.co.uk/forum/ 
> 
> I've been wanting to get anRZ for a while now and do some mods to it too (of course, do a 16x sample expansion on it too!) 
> 
> I'm planning on getting the RZ service manual soo, but no one sells it in pdf form - they all have it in paper copy. 
> 
> Cheers, Graham 
> 
> --- In casiocollectors@yahoogroups.com.au , "likewhatisay" wrote: 
> > 
> > Hi All, Can anyone kindly suggest any 'musical' bending points for the RZ-1 drum machine? 
> > 
> > I'll be setting up some rotary switches for some dataline bends but wondered if anyone had some other points for muffling, timing, body-contact, etc. 
> > 
> > I didn't want to go crazy with a patchbay, just some useful altering via a couple of six way dials with some trimmers if needed and body contacts if possible (just have to be careful with the AC). 
> > 
> > A schematic would be a god send. 
> > 
> > Cheers. 
> >
>