Bc2000 (for the BCF2000 & BCR2000) group photo

Yahoo Groups archive

Bc2000 (for the BCF2000 & BCR2000)

Index last updated: 2026-04-28 23:16 UTC

Thread

Hi - BCR2000 Windows USB problem

Hi - BCR2000 Windows USB problem

2009-05-29 by sharpfish74

Just picked one of these up 2nd hand (actually my second BCR). When I plugged it in/installed drives, it obviously detected it because it let me install the driver but then pops up a windows error

"The I/O device has reported and I/O error"

Obviously i tried wiping the drivers, and restarting, and all that. Possibly a bad USB cable but I don't have another to try.

Tried it on 3 different computers - all do the same.

Will not detect in BCManager. Can't control via USB (soft synths/learning etc).

Any clues on this problem? Or is it a damaged logic chip or something?

Previous owner says it worked ok (on mac) via USB. I did the Panic reset a few times but that's mainly for midi anyway isn't ? It works Fine over midi btw (to my hardware synths)

thanks

RE: [bc2000] Hi - BCR2000 Windows USB problem

2009-05-29 by Paul T

Ok this is strange, I've managed to get midi IN working via usb (controlling soft synth with BCR via midi) AND it no longer shows the error. However to do this
I had to drop back to driver 1.1.1.1 - the latest driver 1.2.1.3 consistently gave the error.

Can't get PRO53 to put out CC to BCR yet (to 'learn' it via USB) so maybe something still wrong/

thanks

To: bc2000@yahoogroups.com
From: sharpfish@...
Date: Fri, 29 May 2009 13:25:32 +0000
Subject: [bc2000] Hi - BCR2000 Windows USB problem



Just picked one of these up 2nd hand (actually my second BCR). When I plugged it in/installed drives, it obviously detected it because it let me install the driver but then pops up a windows error

"The I/O device has reported and I/O error"

Obviously i tried wiping the drivers, and restarting, and all that. Possibly a bad USB cable but I don't have another to try.

Tried it on 3 different computers - all do the same.

Will not detect in BCManager. Can't control via USB (soft synths/learning etc).

Any clues on this problem? Or is it a damaged logic chip or something?

Previous owner says it worked ok (on mac) via USB. I did the Panic reset a few times but that's mainly for midi anyway isn't ? It works Fine over midi btw (to my hardware synths)

thanks



Surfing the web just got more rewarding. Download the New Internet Explorer 8

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.