----- Original Message ----
From: k5kip_1999 <k5kip_1999@...>
To: bc2000@yahoogroups.com
Sent: Wednesday, 23 July, 2008 6:57:17 PM
Subject: [bc2000] Re: BCR2K MCU - VST 'Instrument' select
Right - Sorry I did not get back with you sooner.
The Ch select button will select the track, however that track might
have instruments as well as fx, then you use the vpot select button,
(pushing the encoder #) that corresponds to the device you want to
control.
I did a flash movie on this, on the bcr2000 website.
I think it explains it, I just can't remember.
http://shoshin. 110mb.com/ genmce/bcr2000/ Presets/presets. htm
Look at the flash movie, not the YouTube vid.
Kip
--- In bc2000@yahoogroups. com, "warminstrel" <warrendancey@ ...> wrote:
> Up-date:
>
> Hopefully had question answered in Able forum:
>
> Seems you need to hit the button/rotary on the top left rather than the
> one corresponding to the track itself.
>
> Hope this helps someone else.....
>
>
>
>
>
>
> bc2000@yahoogroups. com, "warminstrel" <warrendancey@ > wrote:
> >
> > Been using Genmce MCU (currently using version 4.1 with Live) and can
> > get all functions to work except selecting vst synths/instruments etc.
> >
> > Using Huskervu which shows data for EQ's, reverb and all FX in
> general
> > but for some reason will not pick up the vst instrument plug ins.
> >
> > Had the same problem with the original MCU and thought the latest
> > version would help but alas no.
> >
> > Anyone else had the same problem? solved it?
> >
> > (New 4.1 version is the shiz by the way...all on one preset too.)
> >
>
__________________________________________________________
Not happy with your email address?.
Get the one you really want - millions of new email addresses available now at Yahoo! http://uk.docs.yahoo.com/ymail/new.html