No luck installing USB W7 x64 driver for my BCF2000
2012-03-22 by John
I never was able to install the driver for 64 bit on my W7 computer. Always got the installation failed....timed out error. I had the BCF in USB-3 mode.
Messages
Browse messages
Page 37 of 110 · 5497 messages matched
Re: BCR 2000 Microwave I template
2012-03-18 by agoraphobic_notes
+1 Sharing a mw patch would be awesome! regards
Re: -- encoders type ? --
2012-03-07 by atmosfere_sonore
Tnx u Dave but there are so many types of encoders available it has to be the right one to fit mechanically and electrically wise i will eventually open it and
Re: [bc2000] -- encoders type ? --
2012-03-07 by Dave
Google sent me here http://www.knutsel.org/2010/09/14/behringer-bcr2000-2/ This guy seems to know his stuff... further down the page he recommends either
-- encoders type ? --
2012-03-07 by atmosfere_sonore
Hello unfortunately yesterday my bcr2000 fell against a rack and i have now the top right 3 encoders broken Anybody knows the exact type , so that i can buy
Re: Is it possible to control more than 8 faders in ableton live with BCF2000?
2012-03-04 by janalex
thank you for the useful info. Really helpfull. It seems that there is a specific issue here (xp 32bit) that disconnects midi out after 8th channel and hangs
Re: Slow encoder? Resolution problem or defective unit?
2012-03-03 by Mark v.d. Berg
... Considering that all the other encoders work normally, a hardware problem with encoder 34 seems most likely. To make sure that the encoder s resolution
Re: [bc2000] Slow encoder? Resolution problem or defective unit?
2012-03-03 by Martin Ator
It either needs taking apart and cleaning or there is crappy solder on it s contacts. I loaded up some pictures to the group showing crap solder. Well, that s
Slow encoder? Resolution problem or defective unit?
2012-03-03 by xs4.droid
I have a slow encoder number 34. I have used bcmanager to make sure the resolution is set to the 96 standard. If I turn it fast it requires many rotations,
Re: Is it possible to control more than 8 faders in ableton live with BCF2000?
2012-03-02 by Mark v.d. Berg
... I m not an expert on Live, but here s what I just did: 1. Switched on the BCF2000 in MC C Emulation Mode (by holding the second top button from the
Re: Cubase 5: Play Stop Record
2012-03-02 by Eric Da Capo
hi, no they didnt develope drivers for win7 for the BCx series that makes me angry too
Cubase 5: Play Stop Record
2012-03-02 by thatgingerdude
Hi, I pretty much understand MIDI, but i think the BCEdit Java software by Behringer is pretty much awful. Are there any clear and straightforward instructions
Is it possible to control more than 8 faders in ableton live with BCF2000?
2012-03-01 by janalex
Is it possible to control more than 8 faders in ableton live with BCF2000 in any mode (mackie emulation or normal presets)? For me all experiments failed
Re: Can group select buttons send cc?
2012-03-01 by dogblessyourart
Thanks for the reply! I figured as much. Worked out a much less elegant solution, but it does the trick.
Re: Can group select buttons send cc?
2012-03-01 by Mark v.d. Berg
... It s an interesting concept, but as far as I know it isn t possible: it s one or the other: these buttons function either as group selectors (doing nothing
Can group select buttons send cc?
2012-03-01 by dogblessyourart
I d like the group select buttons to send MIDI cc. Is this possible? While they also still work as group select? I m using all four groups, and I want to send
Re: [bc2000] Oberheim Matrix 6/1000 editor?
2012-02-27 by Gonzalo
Hello, Hope someone can help me. I tried several times to create a template with BCFRedit for the matrix 1000. No success. Has anyone been successfull using
Re: BCF2000 and control of Cubase 6.0.5 "Quick Control" Sliders
2012-02-27 by cubasesix
Updating: I see there is a request data function that may be of help here - I would be able to stay in Mackie emulation mode ... when I reenter a Cubase
BCF2000 and control of Cubase 6.0.5 "Quick Control" Sliders
2012-02-26 by cubasesix
Hello - I have learned that when set to Mackie Emulation mode, the BCF 20000 motorized faders will not control the Cubase 6.0.5 Quick Control sliders. Does
Re: FIrst Steps for BCF 2000 and computer Newbie
2012-02-21 by cubasesix
Hello Mark - Thank you for your wonderful explanation! I haven t had the chance to unpack the BCF2000, but I will soon, and will have your posts printed out
JV-1080 Virtual Synth preset for BCR-2000 Uploaded
2012-02-20 by Steve Wahl
Hello everyone, In the files area, under the Presets / Roland JV-1080 directory, I have now uploaded BCR-JVXP-VirtSyn.zip. This is not a full editor for the
Re: Oberheim Matrix 6/1000 editor?
2012-02-20 by thermos1979
Thanks much guys. Now I m just trying to figure out what midi settings the Matrix likes in order to read the BCR changes.
Re: newbie
2012-02-19 by peterobrian@ymail.com
Hello Mark, unfortunately the ob matrix 1000 only works with sysex :( i will try this for the mks50, thanks again for your help J,
Re: newbie
2012-02-19 by Mark v.d. Berg
... First of all, of course the synth must be able to send its parameter values: either the whole bunch when you select a synth patch, or an individual
Re: newbie
2012-02-18 by peterobrian@ymail.com
Hello! is there a way if you have a hardware synth connected to the bcr, the synth send the value of a parameter and the led in the bcr goes to the position of
Re: Oberheim Matrix 6/1000 editor?
2012-02-17 by lisabbq
Hi, just uploaded a patch I was trying out for the Matrix 1000 using the BCR2000 Editor.
New file uploaded to bc2000
2012-02-17 by bc2000@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the bc2000 group. File :
BCR 2000 Microwave I template
2012-02-17 by marco.benatti
Hello Does anyone have a BCR2000 template for the Microwave I? Thanks and regards
New file uploaded to bc2000
2012-02-17 by bc2000@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the bc2000 group. File :
Re: Oberheim Matrix 6/1000 editor?
2012-02-17 by peterobrian@ymail.com
Hi, im working on one, now i have what can be called a beta , it has all functions but modulation matrix and tracking and some other.... i have uploaded
Re: [bc2000] Oberheim Matrix 6/1000 editor?
2012-02-17 by bammusic@ozemail.com.au
I have a matrix 6r ..i did do a very basic editor..however being more of an analogue tape guy and not computer guy i think you may find my editor quite all
Oberheim Matrix 6/1000 editor?
2012-02-17 by thermos1979
Hi, I see a lot of attempts documented on the board with will post it as soon as I m done written in them, but no final posts of a BCR preset. Anyone out
Re: [bc2000] So no one uses dp huh?
2012-02-16 by Kieran Fitzpatrick
Sorry Lem, not me. But what is it you want to do? I m sure it ll be doable somehow. Kieran Sent from my iPhone ... Sorry Lem, not me. But what is it you want
So no one uses dp huh?
2012-02-15 by Lem
Www.aviefresh.com
Re: newbie
2012-02-15 by peterobrian@ymail.com
And thanks to all that helped too, now that i know how to interconnect the bcr with my hardware synths, im going to make (or at least try) an oberheim matrix
Re: newbie
2012-02-15 by peterobrian@ymail.com
Hey Mark! that works! so i load the preset into bcr then i change to s-1 mode and thats it, i move the encoders and mks responds just right :) thanks for your
Re: newbie
2012-02-15 by Mark v.d. Berg
... Whenever the BCR is in a U-mode (U-1/2/3/4), the BCR s OWN output (such as the messages intended for the MKS) goes to the USB cable and from there to
Re: [bc2000] Re: newbie
2012-02-15 by Kieran Fitzpatrick
At this point I would record some automation into cubase. Then check all the midi settings are correct in cubase and try and get that automation out to the
Re: newbie
2012-02-15 by peterobrian@ymail.com
Last news, i have reinstalled the usb midi driver and now instead the bcr2000 port 1/2/3 i have just 1 port called BCR2000 , so i have configured bc manager
Re: newbie
2012-02-14 by peterobrian@ymail.com
Hello yatlabatla, i guess you are using a mks50 software editor and the bcr, and you have midi learnt every parameter of the editor to map to the bcr, thats a
Re: newbie
2012-02-14 by peterobrian@ymail.com
Hello, i ve verified that the expected midi messages are sent as can be seen in the image http://oi39.tinypic.com/zlwxzt.jpg also i have connected the mks
Re: [bc2000] Re: newbie
2012-02-14 by bammusic@ozemail.com.au
hi, not that it is any help but i have an mks 50 hooked up and it seems to follow sys ex info from my bcr fine..so get help from the techo guys here and i am
Re: newbie
2012-02-14 by Mark v.d. Berg
... OK, then it s probably a totally different problem. Maybe you can verify that the BCR actually sends the intended MIDI messages: E.g. in BC Manager, from
Re: newbie
2012-02-14 by peterobrian@ymail.com
Hello Mark, thanks for the quick reply yes, it seems that the enconders work in the right way, i.e. the first encoder in the upper row has a value of 0 to 3,
Re: newbie
2012-02-14 by Mark v.d. Berg
... When you move the encoders, do these encoders (and the BCR s display) respond as intended? You should realize that when moving the encoders you re always
Re: newbie
2012-02-14 by peterobrian@ymail.com
Hello everyone, need some help setting up my bcr2000 to talk with my mks-50 using BC Manager. Here s my studio configuration: -computer -midi keyboard usb to
Re: FIrst Steps for BCF 2000 and computer Newbie
2012-02-14 by Mark v.d. Berg
... There are 2 types of Mackie display messages: 1. Display messages sent by a computer program (Reason, Sonar, etc.) TO the Mackie (or in our case: a BCF2000
Digital performer 7
2012-02-13 by Lem
Anyone use a bcf successfully w digital performer? My plan is to get 3 working together so I can have 24 faders. However I can t get even one to work with dp.
Re: [bc2000] Re: FIrst Steps for BCF 2000 and computer Newbie
2012-02-13 by Alex
You can get them here: BC Manager MIDI Tools Cheers!
Re: FIrst Steps for BCF 2000 and computer Newbie
2012-02-13 by cubasesix
... Hello Mark - THANK YOU! You have saved me hours or work, fruitless at that. I m SO grateful! Re: your MIDI Tools vs BC Manager vx. BCFview - where can I