Message
Re: can`t transmit sysex
2008-01-19 by rpcfender
this is very strange.
When you go to the "Save & Get" page in the editor does the Preset list fill up?
If it does then the MIDI connections are OK.
If not check the Midi Selection and press "Get Firmware version" button.
Does it display the Version just above the button?
If Midi is OK, cut and paste this into my editor and see if you can send it to the BCR ?
$rev R1
$preset
.name 'Carma test ; '
.snapshot off
.egroups 4
.fkeys on
.lock off
.init
$button 1
.easypar CC 1 7 0 127 toggleon
.showvalue on
$end
Top right push encoder. Push it and see if you get a CC7 message.
If you do, then there is likely something wrong in you preset script.
If you don't have "$rev R1" for the BCR (or "$rev F1" for the BCF) as the first line then the unit will also ignore the preset
Post your preset script here.
You can cut and paste from my editor.
If it is top secret you can send me an email.
Good luck
Royce