Bc2000 (for the BCF2000 & BCR2000)

I have just discovered out that the Birdie Editor will create a
continious Sysex message or any other MIDI message (with a limit of
123 bytes according to the German document).
In fact it looks like it will send more than one midi message
ie Under LEARNED
$B0 $10 val $B2 $14 val
produces in MidiOx
B0 10 23 
B2 14 23
B0 10 24 
B2 14 24
B0 10 25 
B2 14 25
I have tried half a dozen messages with different channels and
different controllers
$B0 $10 val $B1 $10 val $B9 $23 val
even
$B0 val val 
which sends out
B0 01 01
B0 02 02
B0 03 03
B0 04 04

Try 
$99 val $70 $99 val $0
(midi note on and off channel 10) for really fun drum playing

As the editor doesn't seem to be around any more I'll upload it to
this site and hope that birdie@... won't mind.

By the way the bc2000 will do all sorts of checksum calculations as
well as 14 bit numbers. 
I will edit a Roland Fantom editor and upload it.

--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> The BCR has a message
> .tx
> according to the hacked spec at
> http://www.sequencer.de/synth/index.php/B-Control-Konfiguration
> a small patch is normally
> $rev R1
> $preset
>   .name 'init                    '
>   .snapshot off
>   .request off
>   .egroups 4
>   .fkeys on
>   .lock off
>   .init
> $encoder 1
>   .easypar CC 1 16 44 55 absolute
>   .showvalue on
>   .mode 12dot
>   .resolution 24 24 24 24
>   .default 44
> $end 
> 
> but the .easypar line can be replaced by
> .tx any_midi_message including sysex
> 
> .tx $F0 $41 $00 $12 val $F7
> 
> The data from the encoder is substituted for the 'val' so
> 
> $F0 $41 $00 $12 $10 $F7
> $F0 $41 $00 $12 $11 $F7
> $F0 $41 $00 $12 $12 $F7
> $F0 $41 $00 $12 $13 $F7   etc
> is sent out.
> I don't know of an editor that will enable you to program this but it
> can be edited in MidiOx.
> Has anyone go this to work?
>