Bc2000 (for the BCF2000 & BCR2000)

The BCR has a message
.tx
according to the hacked spec at
http://www.sequencer.de/synth/index.php/B-Control-Konfiguration
a small patch is normally
$rev R1
$preset
  .name 'init                    '
  .snapshot off
  .request off
  .egroups 4
  .fkeys on
  .lock off
  .init
$encoder 1
  .easypar CC 1 16 44 55 absolute
  .showvalue on
  .mode 12dot
  .resolution 24 24 24 24
  .default 44
$end 

but the .easypar line can be replaced by
.tx any_midi_message including sysex

.tx $F0 $41 $00 $12 val $F7

The data from the encoder is substituted for the 'val' so

$F0 $41 $00 $12 $10 $F7
$F0 $41 $00 $12 $11 $F7
$F0 $41 $00 $12 $12 $F7
$F0 $41 $00 $12 $13 $F7   etc
is sent out.
I don't know of an editor that will enable you to program this but it
can be edited in MidiOx.
Has anyone go this to work?