Hello,
I'm just trying sonar with the Behringer BCF2000.
As sonar indicates it, i booted the BCF2000 in B-Control mode, chose a free preset on it, then launched sonar, configured a new ACT controller and sent the "Behringer BCF2000 Custom" preset to the BCF2000 that i saved in it.
All commands from the BCF are now recieved by Sonar, but no sonar command is recieved back by the BCF.
As sonar indicates it, i booted the BCF2000 in B-Control mode, chose a free preset on it, then launched sonar, configured a new ACT controller and sent the "Behringer BCF2000 Custom" preset to the BCF2000 that i saved in it.
All commands from the BCF are now recieved by Sonar, but no sonar command is recieved back by the BCF.
How can i fix this ?
I tried to configure the faders settings of the BCF into "motor" which
normally let the BCF sliders "obey" the softwares commands, but I couldn't
access these parameters via encoder 7. This encoder let me access to params from
"1d"- to "damp". That's all.
Any hint about accessing to these ones "Move, Pick-up, Motor" ?
Any hint about accessing to these ones "Move, Pick-up, Motor" ?
Any other solution to let sonar send orders back to the BCF2000 ?
Many thanks for your anwsers
jico27