Bc2000 (for the BCF2000 & BCR2000)

Hello Again Matt,

I see that you are on props forum too and no luck. Only new thing I can say that I just discovered that in Reason 4 you can change presets but you can't see that on bcr's LED of some reason. I have first eigt sliders on Reason mixer in preset 15 an secon eight on preset 16 and when I change preset from 15 to 16 i actually move from first eight to seconf eight. reason doesn't doing that but my presets.

I don't know if this means something to you but it is undocumented anyway.

Good luck
C.





--- In bc2000@yahoogroups.com, Matt <msb212@...> wrote:
>
> 
> Thank you for advice; I tried that, but still no luck. The default BCR coding re-loads after I delete it.
> 
> In remote override mode, I can't seem to clear the mapping for the BCR's basic edit buttons. It's as if it disregards the BCR's preset scrolling, encoder groups, Learn button, etc.
> 
> I suppose I can from here-on-out work with a BCR-mapped template file... Doesn't make sense to me why it does this though. This kills the possibility of loading various presets or quickly reassigning/learning new knobs.
> 
> Matt
> 
> --- On Thu, 5/7/09, cvijaxo <cvijaxo@...> wrote:
> 
> > From: cvijaxo <cvijaxo@...>
> > Subject: [bc2000] Re: Help running BCR2000 with Reason 4.0?
> > To: bc2000@yahoogroups.com
> > Date: Thursday, May 7, 2009, 2:20 PM
> > > 
> > > I've tried the (bugged?) Behringer BCR software
> > mapping software for Reason presets (can't figure it
> > out)... Tried turning BCR on before and after opening
> > Reason... Tried loading a SysEx via the Librarian program...
> > But to be honest, I am new to this and a bit lost.
> > > 
> > > If anyone can help me, it would be much appreciated! 
> > > 
> > 
> > I'm afraid that Reason 4 take over full kontrol over
> > your bcr2000 via:
> > Codecs/behrinegr.remote or something likie that (i am on PC
> > so I don't know how it looks on Mac). If you remove
> > temporary that file maybe you can use Behringer default
> > presets, but why doing that? 
> > 
> > Have you tried with "Remote override edit mode"
> > under menu "options". That sounds like more direct
> > option and without messing with Props default files. As I
> > see. You can go into Remote override edit mode click on
> > transport and edit (yellow circles) commands for play, rec
> > etc...
> > 
> > Hope It helps
> > 
> > 
> > 
> > ------------------------------------
> > 
> > Yahoo! Groups Links
> > 
> > 
> >
>