Bc2000 (for the BCF2000 & BCR2000)

Did you change the channel first before trying the preset?
I have found that if I send a preset, for the bcr to settle I have to
switch the preset to something else then come back.
If you are using the preset buttons you might have to cycle the power
on the bcr.
Try that, if you haven't already.
Maybe post your preset so we can look at what you are doing...
Kip

--- In bc2000@yahoogroups.com, smokeystovernyc <smokeystovernyc@...>
wrote:
>
> Mark,
> 
> Yes, I am referring to the individual channels assigned to buttons
and encoders.  In BC Manager, I have, for example, all of the cc's in
preset 3 set to send on channel 3.  Then, I send the preset to the
BCR2000, and it receives the preset succuesfully.  However, when I
check the  channel for each button and encoder by accessing the
BCR2000 edit menu, channel 16 is assigned to each one.  I have
verified this by monitoring the midi output with Bome's Midi
Translator...channel 16 for everything.
> 
> Thanks for the reply, Mark.
> 
> joel  
> 
> -----Original Message-----
> From: Mark van den Berg <markwinvdb@...>
> Sent: Wednesday, December 31, 2008 1:29 PM
> To: bc2000@yahoogroups.com
> Subject: [bc2000] Re: BC Manager midi channel issue
> 
> --- In bc2000@yahoogroups.com, joel stover <smokeystovernyc@> wrote:
>  > Problem: When I transfer a preset from BC Manager, it doesn't
>  matter what midi channel I have set, it always ends up being channel
>  16 after transferring to the BCR. I know that I can change the
>  channel manually with the BCR, but that kind of defeats the purpose of
>  BC Manager
> 
>  Strange.
> 
>  Are you talking about the MIDI channels of individual button/encoder
>  definitions (as set on the "Standard output" tab, e.g. for CC
messages)?
>  And what do you mean by "it always ends up being channel 16" (and how
>  have you tested that)?
> 
>  Mark.
> 
>  
>  Messages in this topic  (2)  Reply  (via web post)  | Start a new
topic 
> Messages | Files | Photos | Links | Database | Polls | Members |
Calendar
> MARKETPLACE
> From kitchen basics to easy recipes - join the Group from Kraft Foods 
> 
> 
> [The entire original message is not included]
>