Bc2000 (for the BCF2000 & BCR2000)

Hello I'd like to receive a feedback on this post , is it posible to develop a preset to fully control QuadFrohmage someway I describe bellow 

Please tell me  the way / tools to get there ...

It seems to be a mackie mode ...

Thanks any comments !!!  

Denis

--- In bc2000@yahoogroups.com, "nedaggg" <nedagg@...> wrote:
>
> Hello friends from BGgroup.          Ive been using QUAD FROHMAGE , its
> a very nice filter. I would like to have a preset for BCR (or bcf but my
> interest is on BCR mainly ) , to use this VST on CUBASE SX the number of
> parameters that this filter permits to be controlled by MIDI is enormous
> , mypreset should control a matrix of 8x13x4= 416 parameters .        
> MOst important I think this filter is very intuitive , the organization
> of parameters is easy to understand the flow , and the preset Ive
> beenlooking for would be organized in such a manner that the GUI itself
> is well related with the buttons and VPOT and encoders on bcr, that
> maybe no extra visualization would be necesary ...  basically , this
> filter consists of 04 diferent bands , each band with 8 traditional
> parameters ( freq , Q , gain , etc )  that can be LFO or envelope
> modulated.  with :- 05 parameters on the LFP section , and - 08
> parameters on the envelope ADSR section I thought that some section of
> 04 buttons on the right of BCR2000 could select the BAND .and after the
> BAND is selected , one could press one of the buttons on the toprow
> bellow the main parameter , and BINGO! the parameter now can be
> modulated and the routing is complete . The LFO and envelope are locked
> to this combination ofBAND + selected parameter . The remaining
> parameters are not locked to the LFO or ENV andcould still be tweaked ,
> but no changes on envelopes would occur .Is there a way to program such
> complex preset on BCR ?it seems like a Mackie Mode , because one must
> use some buttons , and then all VPOTs and Encodersasume a different role
> .QUAD FROHMAGE has a complete chart of all this parameters and the NPRN
> associated with it .  Example :         LFO parameters BAND 1 frequency 
> goes from 246 to 250 ,      LFO parameters BAND 2 frequency  goes from
> 292 to 296 , and so on ......the numbers are organized BY BAND , total
> amount of NPRN is 607 , Im  lefting  behindsome less used parameters ,
> and the result would be 416 .there is a complete list of all NPRN
> numbers , of what Ive been reading on the forum maybe after designed the
> main program (vstxml ??? ) one should copy diferent sections of the
> program and edit this numbers and names (many posts I've seem people
> comment) , maybe is there anybody here using QUAD FROHMAGE ? is there
> anybody who could help me to develop this preset ? that would be
> WONDERFULL , I think I would spent A LOT OF TIME TWEAKING ALL THOSE
> buttons !!!!  thanks for any comments and suggestions !!!    If its not
> posible I would like to be informed and not invest too much time trying
> ...because I'm bit stuborn.                      Thanks !!    
> Denis
>