Bc2000 (for the BCF2000 & BCR2000)

Ah! I only have 3 knobs in the standard output tab. It's probably
because I'm using a Custom DPI setting (115% of normal). The one I'm
missing is "Controller", oddly enough! ;) 

I'll change the DPI setting, bet that'll do it.

Thanks!

-Susan

--- In bc2000@yahoogroups.com, "k5kip_1999" <k5kip_1999@...> wrote:
>
> When looking at the standard output tab of the encoder.
> There are 4 knobs.
> Channel, (midi channel
> Controller (this is the one you want to set to 109 to get cc 109) 
> value 1 (normally 0)
> value 2 (normally 127)  
> then the mode drop down (normally absolute).
> 
> My example
> Channel = 1 (midi chan 1)
> Controller = 7 (midi cc #7)
> value 1 = 0 
> value 2 = 127
> 
> 
> 
> --- In bc2000@yahoogroups.com, "hooeygoo" <SMG_Music@> wrote:
> >
> > Hi-
> > 
> > I have BC Manager v1.5.1, and it's excellent!
> > 
> > One thing I don't get is how to edit the parameter for a CC. Say I
> > want an encoder to transmit CC 109 on ch 16. I see how to change
> > everything except the value of the param itself, in this case 109. I'm
> > sure it's something simple, appreciate the help.
> > 
> > Thanks-
> > 
> > -Susan
> >
>