Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "kermic150102" <winter@...> wrote:
> In the display of the BRC/BCF is always shown the number of the actual
> preset. Anyone know if it is possible to show always the value from
> the last parameter change instead.

As far as I know it's not possible.
During the time I analyzed all the MIDI protocols concerning the
BCF/BCR (see "BC MIDI Implementation.pdf") I wondered about different
ways to access the display, but I never found a way. E.g. it would be
nice if BC Manager could simply send any text (well, 4 characters...)
to the BCF/BCR display (for information purposes), but no such luck.
Someone would have to rewrite the BCF/BCR's firmware, I'm afraid...

Mark.