Bc2000 (for the BCF2000 & BCR2000)

What is this?

> Keyboard->
>           |-> BCF -> PC
> BCR------>     ^      |
>                |----<-

OK for S-1 mod, i realy dont need for LED rings. 

And if i use USB hub, is there be latence for that tipe connection? 
Do i need Asio drivers?



--- In bc2000@yahoogroups.com, "rpcfender" <rpcfender@...> wrote:
>
> > > Keyboard --- via MIDI ---> BCR ---- via MIDI ---> BCF ---via 
USB---
> > >
> > > Computer
> > > 
> > > Is this correct?
> > > Page 10 of the user manual shows you how to do this.
> > 
> > Ok this is i need. On manuel it is pic that are connected bcr and 
bcf 
> > no keyboard. But if i connect keyboard in MIDI IN on BCR, i 
shudent 
> > have a problem, do i?
> 
> The picture shows a lead going from the BCF MidiOut to the BCR 
MidiIn
> 
> Midi messages sent from the PC program CAN be used to change the red
> display ring around the encoders (on both the BCF and BCR) and so
> there needs to be a path back from the PC -> BCF -> BCR
> 
> If it is OK to not to have this feature then select mode S-1 on the
> BCR and connect the keyboard into the BCR MidiIn.
> 
> S-1 mode will merge the data from the Keyboard and the BCR and 
output
> it to the MidiOut on the BCR
> 
> Keyboard->
>           |-> BCF -> PC
> BCR------>     ^      |
>                |----<-
> 
> All the best
> Royce
>