Analogue-sequencer

Schematics are uploaded now too, linked from the first build page.
http://www.colinfraser.com/p3/p3-build.htm

Cheers,
Colin f

While I remember - when you power on your P3 for the first time, 
hold F1 + 7 for memory wipe. You need to then press F1 + F2 to 
confirm, or F3 to cancel.
This prevents any weird behaviour due to random data.
Of course some people might like that sort of thing...

Cheers,
Colin f

hi,

busy so far..
main board built,
Switch panel (set of 9) built
Mode switch PCB built,
switch/LED built..

tested all good so far (very pretty when you switch it on colin)
one thing,
Its not immediatly obvious that the switch boards are on one 'chain'

Paul

> busy so far..
> main board built,
> Switch panel (set of 9) built
> Mode switch PCB built,
> switch/LED built..

When I open the P3 factory, do you want a job on the line ? ;-)

> tested all good so far (very pretty when you switch it on colin)

Nagle still wants more flashy bits. 

> Its not immediatly obvious that the switch boards are on one 'chain'

Indeed. Will get round to the wiring page when I can.
My car failed it's MOT tonight, so I've various bits and pieces to do on
that too, before the last MOT runs out on Monday...
No rest for the knackered !

Colin f

Colin f (04:10 pm 8/12/2003) wrote:

 >> tested all good so far (very pretty when you switch it on colin)
 >
 >Nagle still wants more flashy bits.

That's 'cause of that whacky stuff he ingests... He just wants a free 
lightshow with his sequencer!

:)


Mark

Steve/all,

  My panel designs needs a couple of small changes..
I'll e-mail them to steve and the list once I've finished assembling my P3

Paul

Hi Paul..ok  I await your  updates. Are you going for the world record in stuffing boards in the fastest time or what :-) ? 
 
cheers
steve


Paul.Maddox@synth.Net wrote:
Steve/all,

  My panel designs needs a couple of small changes..
I'll e-mail them to steve and the list once I've finished assembling my P3

Paul




Yahoo! Groups SponsorADVERTISEMENT

To unsubscribe from this group, send an email to:
analogue-sequencer-unsubscribe@yahoogroups.com



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 



---------------------------------
Want to chat instantly with your online friends? Get the FREE Yahoo!Messenger

[Non-text portions of this message have been removed]

Steve,

> Hi Paul..ok  I await your  updates.

Nothing too major, but some moving and resizing of holes is needed.

> Are you going for the world record in stuffing boards in the fastest time
or what :-) ?

I can build a Monowave in around 20 hours, sounds a long time, the monowave
main board has 1400 holes. plus five ancillary boards and wiring..

This is a doddle by comparison :-)

BTW, I finished all the boars, everything lights up... I'll assemble it
tomorrow night..

Paul