Analogue-sequencer

For the first question you have to check "start on count".

regards


--- In analogue-sequencer@yahoogroups.com, jason/solvent/suction <solvent@...> 
wrote:
>
> hi,
> 
> First -- Midi Clock issue:
> 
> Not a P3 issue, but wondering if I can find a workaround...
> 
> I use Logic 7 -- since being acquired by Apple, the Midi specs for  
> sequencing external Midi gear are rapidly going downhill. The latest  
> problem -- Logic will only send a Midi Clock 'start' message at the  
> beginning of a song. If you start Logic from  any other point in the  
> song, it will only send a Midi Clock 'continue' message, affecting  
> any hardware unit expecting a 'start' message in order to reset to  
> the beginning.
> 
> Is there any way that the P3 can read a 'continue' message as a  
> 'start' message? (The Kenton Pro-2000, for example, allows you to  
> specify "Midi Clock 'Continue' = 'Start'"). OR, is there any other  
> Midi message that can be sent to the P3 to make it reset to the  
> beginning?
> 
> My current workaround is manually hitting 'Sync' on the P3 before i  
> start the sequence. (Thank god for that!)
> 
> Second -- Sync Out question:
> 
> Does it always send out Midi Clock and DIN Sync? I tried Sync Out to  
> the DIN Sync in on my TR-808 and it doesn't work. Also tried the Sync  
> o\Out to the Midi-in on my x0xb0x, and it syncs, but there is some  
> weird stuff going on too (when I stop the P3, the x0x seems to  
> trigger randomly).
> 
> Any help appreciated,
> 
> thx, Jason
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>