Analogue-sequencer

> I'm using the P3 partly as a midi thru box between an 
> IBKcontrol 10 midi controller, which is controlling an 
> Eventide Eclipse via midi channel 1. With the P3 not running 
> but set to midi thru F1 sometimes the CC#s from the ibk are 
> not properly recognised by the Eclipse. If I take the P3 out 
> of the chain the messages are transmitted perfectly.
> 
> Is there any setting or reason internal to the P3 which could 
> possibly have this effect??

Are you still on the release version 3.1.005, or the newer beta ?
There have been no reports of thru problems in the release version.
Paul N thought he might have had a problem with the .006 beta, which added a
fair bit of complexity to the thru code since it's now handling a single
channel for record. I decided to re-write it in the most recent build,
because it had got a bit too complex for my liking, so it would be
interesting to know if you get the same problem with that build.
It could be there was a subtle problem in the release version that still
affected the previous beta.
We're approaching a release version, but if you want to see if the current
beta fixes your problem, it would be useful to know.

While I'm on the subject, the latest build adds 'groups' to make the
selection of aux events simpler.
By pressing FUNC while selecting an aux event, you toggle between the events
and higher level groups of events.
When selecting an event, the members of each group are spread over the whole
DATA knob, making it easier to find and select each one.

Best regards,
Colin Fraser
Sequentix Music Systems Ltd
http://www.sequentix.com