Analogue-sequencer

Hi Gene, 

> > I sent the Bootloader 3.1 - T89 version.
> >
> > Everything seemed fine at first - I got the
> > size0680 chk2F31
> > boot 		flash

OK, this means you have got the latest bootloader installed.

> "What happens if you hold FUNC+PAGE when you power on ?
> Does it go into the boot/flash screen, or just get stuck at 
> the Firmware
> check..."
> 
> That seems to work properly. It goes into the boot/flash 
> screen, and it
> still seems to be able to receive the firmware dumps...

OK so far...

> For instance, when I use the firmware upload it tells 
> me that the
> upload failed, and when I simply upload the .syx file it 
> tells me that there
> were 14 errors. Could I have sent corrupted data?

I'm not sure what you're doing there...
You can only use firmware upload on P3Tools to transmit a firmware image
.syx file.
What did you mean by 'simply upload the .syx file' ?
What exactly does the display say in P3Tools when you do 'firmware upload',
and select the latest image file (p3fw-3.1.004.syx)

Cheers,
Colin f