Akai S1000 / S1100 samplers

Yes, last time the unit was open I made sure to check that the 
jumpers had been soldered in and they're there.

--- In akaiS1000S1100Samplers@yahoogroups.com, "PeWe" <ha-pewe@...> 
wrote:
>
> Did you jumper the S-1000s mainboard the right way ? You have to 
solder 
> bridges for use w/ 8Meg cards in combination w/ 2 Meg cards as also 
to take 
> care of the slots the cards are inserted in !!!
> 
> PeWe
> 
> 
> ----- Original Message ----- 
> From: jonbstevens
> To: akaiS1000S1100Samplers@yahoogroups.com
> Sent: Friday, May 18, 2007 8:02 AM
> Subject: [akaiS1000S1100Samplers] Re: S 1000 SCSI Problems
> 
> 
> Hi,
> 
> I'm new to the list and have been reading through the archives. I
> have an identical problem with my S1000 at the moment as well. If it
> helps i'm using ver 4.4 of the OS.
> 
> Even more strange is the following. I have 1 8mb card in the 
machine.
> When I boot under OS 4.4 it only shows 4mb available. When I boot
> >from the OS ver 1 on the EPROM then it shows the full 10mb 
available.
> Am I missing something obvious?
> 
> If none of these problems are fixable are there any S1000 for sale 
in
> Northern California? specifically the SF Bay area? Thanks!
> 
> Jonathon
>