The Cyndustries List

I measured my ZO with a five digit frequency counter and see no appreciable
jitter from 50-200 Hertz.

John Loffink
The Microtonal Synthesis Web Site
http://www.microtonal-synthesis.com
The Wavemakers Synthesizer Web Site
http://www.wavemakers-synth.com


> Michael Zacherl, Vienna/Austria wrote:
> 
> > Hi Morbius, Mike, Cynthia & All!
> >
> >
> > The only patch cable I put on the ZO was the pulse out to a LP-filter.
> > Nothing else.
> > By "playing around" I ment flicking switches, turning knobs etc. and
> > check what changes while doing that.
> >
> > The jitter is a frequency jitter, I'm pretty sure. It sounds like if you
> > apply a deeply filtered noise at a very low level to the exp-input of
> > a VCO.
> > It's better audible at lower frequencies (~200-500Hz) and basically not
> > very strong.
> > I thought of a bad cable, a loose connection and tried others - no luck.
> > The other waveforms are stable (checked with the same cable and filter,
> > just plugged into the other sockets on the ZO).
> >
>