SynthModules

I posted this also on the Speakjet group. I'm having the exact same
problem.  I can talk to the speakjet in hyperterminal and can see the
data with a scope on the RS-232 pin 3. In PhraseAlator I see no data.
 I had to install the MSCOMM32.OCX file in the \system32 and run
REGSVR32.EXE to register it.  I am running WindowsXP Pro.

Any other suggestions?

Dave


--- In speakjet@yahoogroups.com, "Ken Griest" <posoup@w...> wrote:
> The problem is that it doesn't work with the PhraseALator
> software, which I found isn't sending data from my laptop's
> comm port.  Hyperterminal and CCS's Serial I/O Monitor work,
> since I can type text and the speakjet will utter the correct
> allophones.
>
> I scoped my comm port's TX and RX lines and I see the data
> coming out  from Hyperterminal and CCS.  PhraseALator shows
> no activity, not with any comm port setting 1-4.
>
> I have all the neccessary VB ocx files installed, so I'm stuck.
> Has anyone seen this, or know what's wrong?  Thanks in advance!
>
> -Ken