SynthModules

(Assuming you're using a CP51) -from the on-line manual the LFO 
output is +/-2.5V, which probably isn't enough to the PSIM.  If you 
mult the LFO out to the mixer (which is unity gain) I'd think it'd 
boost the level to +/-5V, which should trigger it (the two 
LFO 'copies' adding together in phase).  Or, if you have a DC source, 
plug that into the mixer to offset it positive so it's swinging fully 
0-5V.

Cheers,
Scott
(Who doesn't have any Moogerfooger stuff, but wouldn't mind.....)


--- In SynthModules@yahoogroups.com, "john mahoney" <jmahoney@g...> 
wrote:
> ----- Original Message ----- 
> From: "Woody Wall" <woody_wall@h...>
> 
> > times. The AUX output is pulsed synchronously with the incoming 
clock,
> > but it needs to be buffered to be useful; I couldn't get my 2600 
EGs
> > or the DSC to trigger on it.
> 
> Good point -- I couldn't get a Moogerfooger LFO output to trigger 
the PSIM's
> Start input, but I forgot about that when I posted my happy little 
review a
> few minutes ago (to AH and SDIY).
> 
> How much voltage is needed at the Start input?
> 
> Thanks to you guys who have built the existing PSIM code base: 
Brice, Grant,
> Dr. Mabuse, and Woody. I hope I'm not leaving anyone out.
> --
> john