If you unplug the multi-way connector from the main board and measure the voltage at the power supply end, what do you get (on initial power-up and then after a few minutes) ? --- In Simmons_Drums@yahoogroups.com, "sarsipri" <alfco@...> wrote: > > I have one SDS 9 with a power problem. The wire cable that goes to the mainboard, there is one brown wire with about 9 volt. After a few minutes drops to about 6 volt and all triggers go on. Can anybody check how much the output should be? >
Message
Re: SDS 9 power supply
2013-07-15 by philmurr