--- In Simmons_Drums@yahoogroups.com, "superwolle70" <superwolle70@y...> wrote: > > Hi Matt, I tried it out, there's no trick ;-) > the easiest way to check is: > After you have turned on the MTX9, press "PROGRAMM" twice. All bank > LEDs will light up. Now you are in Midi mode. The number displayed is > the receiving midi channel. Switch it to the desired midi channel or > change your signal source. > Press "PROGRAMM" again. The "MODE" LED will light up. The number > displayed is the midi mode. mode "8" is "note on" and likely the mode > you need. I connected my keyboard (in mode 8 sending on channel 1) to > the MTX9 and I could trigger its sounds without any problem. How to > assign a midi note to a sample is described on page 25 in the manual. > Bye > Wolfgang > > --- In Simmons_Drums@yahoogroups.com, "matt_ritche" <matt_ritche@y...> > wrote: > > > > the manual says you can trigger mtx9 with midi,but i've had no such > > luck .anyone out there have any luck at accomplishing this?if so > > please help me! > > >page 30 in the manual is actually page 1-with the heading "concept-an introduction to the mtx9", should'nt it be page 30? this manual is the one i downloaded from your site
Message
Re: mtx9 midi
2005-10-19 by matt_ritche
Attachments
- No local attachments were found for this message.