SergeModular

>>>>>>>>>> The Touch Controlled Voltage Source [TEV] has 8 independent
>>>>>>>>>> VC slope generators, each associated with a touch pad (#1-8 )
>>>>>>>>>> as their primary trigger source. These 8 envelopes can be
>>>>>>>>>> manually
>>>>>>>>>> "played" and/or sequenced with the sequence length, speed and
>>>>>>>>>> direction
>>>>>>>>>> set with a combination of patching, switch settings & touch
>>>>>>>>>> pad addressed
>>>>>>>>>> reset points. The eight individual slope/envelope units have
>>>>>>>>>> VC of total time
>>>>>>>>>> so you can shrink and stretch the rise and fall real time by
>>>>>>>>>> another envelope
>>>>>>>>>> in the sequence or by any other control generator on your
>>>>>>>>>> system.
>>>>>>>>>> This main facility as further complemented by a 8x4 sequencer
>>>>>>>>>> associated with touch pads #9-16 whose prime use would be for
>>>>>>>>>> supplying
>>>>>>>>>> programmable voltage sources to the VC inputs of your
>>>>>>>>>> system's [DSG]s
>>>>>>>>>> and [DTG]s the complete a phalanx waterfall of touch
>>>>>>>>>> sequenced envelopes!
>>>>>>>>>>
>>>>>>>>>> Given all the circuitry and resultant wiring, their is no
>>>>>>>>>> room inside for a Quantizer.

On Feb 16, 2009, at 12:56 AM, Carlos wrote:

> Anyone here has the TEV -Touch Envelope Voltage Source- /pictures of
> the entire faceplate info on how it works?
>
> I understand is basically 8 step TKB on one side and 8 touch or gate
> activated envelopes on the other side? 3 rows? what else? if there is
> only 3 rows on the tkb side then whats the extra space used for?
>
> can it be ordered?
>
> trying to figure out if is something I want in the distant future to
> compliment the tkb and once the system is big enough so that it
> actually makes sense to have a second controller....
>
> thanks!
> C.
>
>

--- In SergeModular@yahoogroups.com, Kim Hansen <antenne@...> wrote:
>
>
>
>
> I asked Rex bout the ( TEV )
> a couple of years ago
> below is what he wrote me :
>
>
>
>
>
>
> >>>>>>>>>> The Touch Controlled Voltage Source [TEV] has 8
independent
> >>>>>>>>>> VC slope generators, each associated with a touch pad
(#1-8 )
> >>>>>>>>>> as their primary trigger source. These 8 envelopes can be
> >>>>>>>>>> manually
> >>>>>>>>>> "played" and/or sequenced with the sequence length, speed
and
> >>>>>>>>>> direction
> >>>>>>>>>> set with a combination of patching, switch settings &
touch
> >>>>>>>>>> pad addressed
> >>>>>>>>>> reset points. The eight individual slope/envelope units
have
> >>>>>>>>>> VC of total time
> >>>>>>>>>> so you can shrink and stretch the rise and fall real time
by
> >>>>>>>>>> another envelope
> >>>>>>>>>> in the sequence or by any other control generator on your
> >>>>>>>>>> system.
> >>>>>>>>>> This main facility as further complemented by a 8x4
sequencer
> >>>>>>>>>> associated with touch pads #9-16 whose prime use would be
for
> >>>>>>>>>> supplying
> >>>>>>>>>> programmable voltage sources to the VC inputs of your
> >>>>>>>>>> system's [DSG]s
> >>>>>>>>>> and [DTG]s the complete a phalanx waterfall of touch
> >>>>>>>>>> sequenced envelopes!
> >>>>>>>>>>
> >>>>>>>>>> Given all the circuitry and resultant wiring, their is no
> >>>>>>>>>> room inside for a Quantizer.
>
> On Feb 16, 2009, at 12:56 AM, Carlos wrote:
>
> > Anyone here has the TEV -Touch Envelope Voltage Source- /pictures
of
> > the entire faceplate info on how it works?
> >
> > I understand is basically 8 step TKB on one side and 8 touch or
gate
> > activated envelopes on the other side? 3 rows? what else? if
there is
> > only 3 rows on the tkb side then whats the extra space used for?
> >
> > can it be ordered?
> >
> > trying to figure out if is something I want in the distant future
to
> > compliment the tkb and once the system is big enough so that it
> > actually makes sense to have a second controller....
> >
> > thanks!
> > C.
> >
> >
>

On Feb 17, 2009, at 2:02 PM, Carlos wrote:

> cool, now my only question is if those 8 envelopes have a trigger in,
> can't tell for sure from the description,but it would make sense? I am
> sold if they do...
>
> c
>
> --- In SergeModular@yahoogroups.com, Kim Hansen <antenne@...> wrote:
> >
> >
> >
> >
> > I asked Rex bout the ( TEV )
> > a couple of years ago
> > below is what he wrote me :
> >
> >
> >
> >
> >
> >
> > >>>>>>>>>> The Touch Controlled Voltage Source [TEV] has 8
> independent
> > >>>>>>>>>> VC slope generators, each associated with a touch pad
> (#1-8 )
> > >>>>>>>>>> as their primary trigger source. These 8 envelopes can be
> > >>>>>>>>>> manually
> > >>>>>>>>>> "played" and/or sequenced with the sequence length, speed
> and
> > >>>>>>>>>> direction
> > >>>>>>>>>> set with a combination of patching, switch settings &
> touch
> > >>>>>>>>>> pad addressed
> > >>>>>>>>>> reset points. The eight individual slope/envelope units
> have
> > >>>>>>>>>> VC of total time
> > >>>>>>>>>> so you can shrink and stretch the rise and fall real time
> by
> > >>>>>>>>>> another envelope
> > >>>>>>>>>> in the sequence or by any other control generator on your
> > >>>>>>>>>> system.
> > >>>>>>>>>> This main facility as further complemented by a 8x4
> sequencer
> > >>>>>>>>>> associated with touch pads #9-16 whose prime use would be
> for
> > >>>>>>>>>> supplying
> > >>>>>>>>>> programmable voltage sources to the VC inputs of your
> > >>>>>>>>>> system's [DSG]s
> > >>>>>>>>>> and [DTG]s the complete a phalanx waterfall of touch
> > >>>>>>>>>> sequenced envelopes!
> > >>>>>>>>>>
> > >>>>>>>>>> Given all the circuitry and resultant wiring, their is no
> > >>>>>>>>>> room inside for a Quantizer.
> >
> > On Feb 16, 2009, at 12:56 AM, Carlos wrote:
> >
> > > Anyone here has the TEV -Touch Envelope Voltage Source- /pictures
> of
> > > the entire faceplate info on how it works?
> > >
> > > I understand is basically 8 step TKB on one side and 8 touch or
> gate
> > > activated envelopes on the other side? 3 rows? what else? if
> there is
> > > only 3 rows on the tkb side then whats the extra space used for?
> > >
> > > can it be ordered?
> > >
> > > trying to figure out if is something I want in the distant future
> to
> > > compliment the tkb and once the system is big enough so that it
> > > actually makes sense to have a second controller....
> > >
> > > thanks!
> > > C.
> > >
> > >
> >
>
>

--- In SergeModular@yahoogroups.com, Kim Hansen <antenne@...> wrote:
>
> You should get on the phone to Rex and ask -
> or maybe ask here:
>
> http://www.twelfthroot.com/studio/analogSM1.html
>
> apparently they've got a tev
>
> Kim
>
> On Feb 17, 2009, at 2:02 PM, Carlos wrote:
>
> > cool, now my only question is if those 8 envelopes have a trigger
in,
> > can't tell for sure from the description,but it would make sense?
I am
> > sold if they do...
> >
> > c
> >
> > --- In SergeModular@yahoogroups.com, Kim Hansen <antenne@> wrote:
> > >
> > >
> > >
> > >
> > > I asked Rex bout the ( TEV )
> > > a couple of years ago
> > > below is what he wrote me :
> > >
> > >
> > >
> > >
> > >
> > >
> > > >>>>>>>>>> The Touch Controlled Voltage Source [TEV] has 8
> > independent
> > > >>>>>>>>>> VC slope generators, each associated with a touch
pad
> > (#1-8 )
> > > >>>>>>>>>> as their primary trigger source. These 8 envelopes
can be
> > > >>>>>>>>>> manually
> > > >>>>>>>>>> "played" and/or sequenced with the sequence length,
speed
> > and
> > > >>>>>>>>>> direction
> > > >>>>>>>>>> set with a combination of patching, switch settings
&
> > touch
> > > >>>>>>>>>> pad addressed
> > > >>>>>>>>>> reset points. The eight individual slope/envelope
units
> > have
> > > >>>>>>>>>> VC of total time
> > > >>>>>>>>>> so you can shrink and stretch the rise and fall real
time
> > by
> > > >>>>>>>>>> another envelope
> > > >>>>>>>>>> in the sequence or by any other control generator on
your
> > > >>>>>>>>>> system.
> > > >>>>>>>>>> This main facility as further complemented by a 8x4
> > sequencer
> > > >>>>>>>>>> associated with touch pads #9-16 whose prime use
would be
> > for
> > > >>>>>>>>>> supplying
> > > >>>>>>>>>> programmable voltage sources to the VC inputs of
your
> > > >>>>>>>>>> system's [DSG]s
> > > >>>>>>>>>> and [DTG]s the complete a phalanx waterfall of touch
> > > >>>>>>>>>> sequenced envelopes!
> > > >>>>>>>>>>
> > > >>>>>>>>>> Given all the circuitry and resultant wiring, their
is no
> > > >>>>>>>>>> room inside for a Quantizer.
> > >
> > > On Feb 16, 2009, at 12:56 AM, Carlos wrote:
> > >
> > > > Anyone here has the TEV -Touch Envelope Voltage Source-
/pictures
> > of
> > > > the entire faceplate info on how it works?
> > > >
> > > > I understand is basically 8 step TKB on one side and 8 touch
or
> > gate
> > > > activated envelopes on the other side? 3 rows? what else? if
> > there is
> > > > only 3 rows on the tkb side then whats the extra space used
for?
> > > >
> > > > can it be ordered?
> > > >
> > > > trying to figure out if is something I want in the distant
future
> > to
> > > > compliment the tkb and once the system is big enough so that
it
> > > > actually makes sense to have a second controller....
> > > >
> > > > thanks!
> > > > C.
> > > >
> > > >
> > >
> >
> >
>

>
> cool, now my only question is if those 8 envelopes have a trigger in,
> can't tell for sure from the description,but it would make sense? I am
> sold if they do...
>
> c
>
> ---
>

>
> looking at a graphic of the TEV, there are 2 sets of 8 output jacks. For
> inputs, there's a clock, up/down, and reset.
> NO trigger inputs. Looks like all the triggering is done by touching
> the keypads, but not by external trigger signal.
>
> C
>

--- In SergeModular@yahoogroups.com, "kkonkkrete" <kkonkkrete@...> wrote:
>
>
> I'm also curious about the TEV. John, where did you see the front
> panel graphic? Any chance you could post it?
>
> Would love to know if it is still in production (probably not, but,
> well, maybe if enough of us ask ...)
>