Serge panel FS
2002-08-14 by Jim Johnson
I've definitaly decided to sell my Serge panel. Here's the deal:
Modules are
1 NTO
1 Wave Multiplier
1 Variable Q VCF
1 Dual Universal Slope Generator
1 Phaser
2 Dual VCAs
2 Control Modules
Power 1 Supply with "custom" wiring harness
This is an older Series 79 panel that was later retrofitted with an STS
front panel. (I believe it's a Series 79 becasue of the stickers on the
boards that say "9/80", "3/80", etc.
Probems:
- VCF is not working correctly: Below a certain (low) cutoff frequency,
neither the high nor lowpass outputs will pass a signal. There's an abrupt
cessation of sound.. it's not correct filter behavior.
- Initial gain pots for VCAs are wired backwards
- Jack colors are somewhat random
- Some pots are dirty
- The holes in the back cover that accept mounting screws are somewhat
tired, so the screws are no longer tight.
A pic is available on request.
Price on this will be $1250, including shipping and insurance in the US
only. Non-US buyers will be considered, but extra shipping $ may be
required.
Jim Johnson
Metaphoric Software
-------------------
Makers of Techno Toys
Software for Electronic Music
http://www.technotoys.com
info@...
Modules are
1 NTO
1 Wave Multiplier
1 Variable Q VCF
1 Dual Universal Slope Generator
1 Phaser
2 Dual VCAs
2 Control Modules
Power 1 Supply with "custom" wiring harness
This is an older Series 79 panel that was later retrofitted with an STS
front panel. (I believe it's a Series 79 becasue of the stickers on the
boards that say "9/80", "3/80", etc.
Probems:
- VCF is not working correctly: Below a certain (low) cutoff frequency,
neither the high nor lowpass outputs will pass a signal. There's an abrupt
cessation of sound.. it's not correct filter behavior.
- Initial gain pots for VCAs are wired backwards
- Jack colors are somewhat random
- Some pots are dirty
- The holes in the back cover that accept mounting screws are somewhat
tired, so the screws are no longer tight.
A pic is available on request.
Price on this will be $1250, including shipping and insurance in the US
only. Non-US buyers will be considered, but extra shipping $ may be
required.
Jim Johnson
Metaphoric Software
-------------------
Makers of Techno Toys
Software for Electronic Music
http://www.technotoys.com
info@...