Synth-DIY Yahoo! Groups Archives

Thread

original filters info required

2002-07-27 by sasami@hotkey.net.au

Does anyone have good clear photos of the original Serge filters they would
be prepared to share with me?
I have started to repair the dead one in my system. As mentioned before, my
filters and VCOs were encased in resin. Unfortunately in this case, the
surface of the resin cured, trapping solvents inside, and they have disolved
the plastic portions of a number of components, as well as causing rust and
lead failure, and partial reaction with the PCB itself.

Thanks,

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Re: original filters info required

2002-07-28 by Steve Ridley

> Does anyone have good clear photos of the original Serge filters they

would

> be prepared to share with me?

If you don't get a reply, you could try Emailing Don Hassler.
He posted the pics of the vintage Serge in the pictures
area of the Yahoo Serge Modulars group, so his address
should be in the old messages. I asked him a couple of
questions and he was happy to answer and even offered
to take some photos next time he opened it up. His
Serge is from around 1975, so I guess it will be very
similar to yours.

Steve

Re: original filters info required

2002-07-29 by RFahl

Attachments :

Hello Ken,

I don't know if you have this or not. Maybe it will be some help to you.

Romeo

----- Original Message -----

Show quoted textHide quoted text

From: <sasami@...>
To: <SergeModular@yahoogroups.com>
Sent: Saturday, July 27, 2002 5:41 PM
Subject: [SergeModular] original filters info required

>
> Does anyone have good clear photos of the original Serge filters they
would
> be prepared to share with me?
> I have started to repair the dead one in my system. As mentioned before,
my
> filters and VCOs were encased in resin. Unfortunately in this case, the
> surface of the resin cured, trapping solvents inside, and they have
disolved
> the plastic portions of a number of components, as well as causing rust
and
> lead failure, and partial reaction with the PCB itself.
>
> Thanks,
>
> Ken
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>