To limit the number of steps, patch the clock (a square wave or pulse) to the CLOCK input, patch the stage gate output (the row of red jacks above row A) for one more than the desired length of the sequence to the RESET input.
To expand the length to 64 steps, patch the clock to the CLOCK input and step 16 gate output to the VERT CLOCK input and take the output from ABCD.
Have fun!
Matt
To expand the length to 64 steps, patch the clock to the CLOCK input and step 16 gate output to the VERT CLOCK input and take the output from ABCD.
Have fun!
Matt
On Sun, Aug 30, 2009 at 3:44 PM, dr.jasoncrest <dr.jasoncrest@...> wrote:
Thanks Matt,
I've got a PDF of the Gold book already and I was able to find some general info on the TKB in there but nothing super specific. I've been meaning to go through some of those learning patches but they don't totally apply to my system.
What about limiting the duration of the sequence to under 16 and expanding the sequence up to 64?
Very Best,
Jason> On Sun, Aug 30, 2009 at 11:11 AM, dr.jasoncrest <dr.jasoncrest@...>wrote:
--- In SergeModular@yahoogroups.com, matthew carpenter <matfhew.carpenfer@...> wrote:
>
> Hi,
>
> Welcome to the list and congratulations on Serge ownership.
>
> The TKB likes to see square waves at it's clock inputs, such as the red
> output of a VC Clock, TGO, TGC, DTG or DSG, among many others, in cycle mode
> (either via switch or a shorty cable bridging the Trig In and Gate Out).
> The Serge Gold Book is one of the best resources for learning about these
> things including TKB operation. Scroll down on this page and download the
> .zip of the book.
>
> http://www.carbon111.com/serge.html
>
> Always feel free to ask any questions you might have.
> Matt
>
>
> >
> >
> > Greetings,
> > I appreciate the opportunity that this forum provides and hopefully at some
> > point I can contribute with answers. However, all I have at the moment are
> > questions and I'm grateful in advance for your help.
> > Currently I'm a bit overwhelmed by my new Serge though slowly/surely
> > working my way through (and around) it. I recently started using the TKB and
> > have had some issues clocking it properly. I've been using a triangle wave
> > as well as a DTG & SSG. I haven't been able to get the TKB sequencer to run
> > straight through from 1 to 16. Currently it's firing at random. What should
> > I use to clock it so that it will run sequentially through the 16 steps?
> > Is there anything resembling a manual for the TKB?
> >
> > Thanks!
> > Jason
> >
> >
> >
>