Hi Nils,
The Animal's a great choice!
I would use the following for a 3 operator FM patch with an Animal. Pretty much echoing what Steve said:
The NTO provides a built-in VCA for FM modulation amount so the other VCA for controlling the mod. amount of the PCO could be obtained from the top section of the Wave Multiplier (in LO mode). Then, if you want control over the mod. amount for your third oscillator, which could be the self-oscillating VCFQ, use half of the UAP.
The Smooth section of the SSG and both halves of the DTG can be patch-programmed to behave as transient generators or dual-waveform LFOs. These won't behave like VCAs, if patch-programmed -- the behavior is more like a low-pass gate.
Matt
The Animal's a great choice!
I would use the following for a 3 operator FM patch with an Animal. Pretty much echoing what Steve said:
The NTO provides a built-in VCA for FM modulation amount so the other VCA for controlling the mod. amount of the PCO could be obtained from the top section of the Wave Multiplier (in LO mode). Then, if you want control over the mod. amount for your third oscillator, which could be the self-oscillating VCFQ, use half of the UAP.
The Smooth section of the SSG and both halves of the DTG can be patch-programmed to behave as transient generators or dual-waveform LFOs. These won't behave like VCAs, if patch-programmed -- the behavior is more like a low-pass gate.
Matt
On Mon, Aug 10, 2009 at 10:01 AM, stkorn <stkorn@...> wrote:Hi Nils,
Welcome to the list! The Animal is a great choice for an all-in-one Serge. As far as I know, the bottom section of the SSG cannot be used as a VCA but nonetheless I think you have all the pieces needed to do the 3 operator FM patch you describe. Oscillators are no problem, you would have at least 6 to choose from. Let's say you use the NTO, PCO and VCFQ. You can then use both halves of the DTG as EG's plus the SSG smooth section which can self-cycle as an LFO (you said you also have external ramp generators so that would give you more options here) . For VCA's you have the top section of the Wave Multiplier plus the two in the UAP. So it looks like you would be able to do the patch (plus a whole lot more of course!)> I would like your feedback on one of these patches, namely the "reduced Yamaha DX". The idea is to make a 3-operator FM synth, not in any way an exact replica of a Yamaha DX, but with a similar and simplified architecture. The 6-op DX7 arcitecture will of course demand a lot more modules, and I'm thinking 3-op will give me enough to play with when taking voltage-controllability, wave multipliers etc into account.)
--- In SergeModular@yahoogroups.com, "Nils Odegaard" <nilsodegaard@...> wrote:
>
> Hi everyone,
>
> I'm new to this list, and not (yet) a Serge owner. I'm contemplating acquiring an Animal, after years of drooling over a Serge system.
>
> One of the things I like about Serge is, not surprisingly, the patch-programmability. Since an Animal seems most suited to my needs, I'm currently trying to understand the possible uses of each of the modules. One way of doing this is to set up "imaginary patches" in my head :)
>