You can build an adapter pretty easily. You can get banana and BNC connectors/jacks from RadioShack or another electronics store and connect the two together (either by soldering, bending wires, or just using alligator clips.) I'm using the last approach and it works just fine for watching signals from a synth. It's a little hacked looking, but it works and its cheap. I can post some pictures if what I wrote above isn't clear.
As far as scopes are concerned, you can sometimes find one pretty cheap at thrift stores/pawn shops/craigslist. eBay has a good selection of older ones too. You can pick up something like an Eico 425 for $50 or less on eBay.
zach
As far as scopes are concerned, you can sometimes find one pretty cheap at thrift stores/pawn shops/craigslist. eBay has a good selection of older ones too. You can pick up something like an Eico 425 for $50 or less on eBay.
zach
--- In SergeModular@yahoogroups.com, "johnrichoux" <jrichoux@...> wrote:
>
> So, how do you interface your scope with the Serge? For example, the Owon & Velleman have BNC connectors. Do you use a probe or some kind of BNC to banana adaptor?
>
> Thanks for your responses
>
> jmr
>