SergeModular

if you send the clock to the xfader control input and each row to either side of the xfader signal inputs you should get double the steps. the pattern will be A1 B1 A2 B2 A3 B3 A4 B4 etc...
you can also change the clock duty cycle for swing rhythms

--- On Wed, 12/17/08, Carlos <bushwick@...> wrote:

From: Carlos <bushwick@...>
Subject: [SergeModular] Re: patching VC switch? (combining sequencer rows to get more steps)
To: SergeModular@yahoogroups.com
Date: Wednesday, December 17, 2008, 2:59 PM






that will provide one short pulse after every 8 steps of the clock and
will only change the xfade from one input to another for the duration
of the pulse.

perhaps there is no way of actually patching this and I just need to
go get a TKB if I want anything over 8 steps. life is tough.

--- In SergeModular@ yahoogroups. com, Bakis Sirros
<synth_freak_ 2000@...> wrote:
>
> inputing the sequencer clock into the pulse divider module and using
the pulse divider 1/8 output into the xfade input of the ACPR?
> i guess this should work...?
>
>
> Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> [Doepfer_a100] group owner
> www. parallel - worlds - music. com
> www. myspace. com/ parallelworldsmusic
> www. myspace. com/ interconnectedmusic
> www. myspace. com/ memorygeist
> www. DiN. org. uk
> www. musicamaximamagneti ca. com
> www. shimarecords. co. uk
> www. rubberrecords. gr
> Athens - Greece
>
> --- On Wed, 12/17/08, Carlos <bushwick@.. .> wrote:
>
> From: Carlos <bushwick@.. .>
> Subject: [SergeModular] Re: patching VC switch? (combining sequencer
rows to get more steps)
> To: SergeModular@ yahoogroups. com
> Date: Wednesday, December 17, 2008, 11:01 PM
>
>
>
>
>
>
> I guess I am looking for a sequential switch type of device then or
a
> clocked switch then.
>
> but curious what combinations of modules will give me that switching
> functionality with the ACPR even if its a 5volt constant input
instead
> of pulse, any ideas to generate that 5 volt constant output as the
> sequencer is in its second row?
>
> C.
>
> --- In SergeModular@ yahoogroups. com, Bakis Sirros
> <synth_freak_ 2000@> wrote:
> >
> > some vc-switches need an X volts voltage to switch between the two
> inputs (staying at input 2 as long as the voltage is X volts high)
and
> not a trigger to go from input 1 to input 2.
> >
> > if a switch needs a trigger to switch between its inputs then it
> would be a clocked switch.
> >
> >
> >
> > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> > [Doepfer_a100] group owner
> > www. parallel - worlds - music. com
> > www. myspace. com/ parallelworldsmusic
> > www. myspace. com/ interconnectedmusic
> > www. myspace. com/ memorygeist
> > www. DiN. org. uk
> > www. musicamaximamagneti ca. com
> > www. shimarecords. co. uk
> > www. rubberrecords. gr
> > Athens - Greece
> >
> > --- On Wed, 12/17/08, Carlos <bushwick@ .> wrote:
> >
> > From: Carlos <bushwick@ .>
> > Subject: [SergeModular] Re: patching VC switch? (combining
sequencer
> rows to get more steps)
> > To: SergeModular@ yahoogroups. com
> > Date: Wednesday, December 17, 2008, 9:37 PM
> >
> >
> >
> >
> >
> >
> > how would you patch the ACPR so that it will automatically switch
to
> > the other input at the end of a number of stages? would need a
> > constant 5 volt input to do that no? a switch just needs a pulse
to
> > change inputs?
> >
> > --- In SergeModular@ yahoogroups. com, Bakis Sirros
> > <synth_freak_ 2000@> wrote:
> > >
> > > you can make a vc-switch (2 in - 1 out) with an ACPR.
> > >
> > > btw, any other ideas how to make a vc-switch with Serge modules?
> > >
> > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
> > > [Doepfer_a100] group owner
> > > www. parallel - worlds - music. com
> > > www. myspace. com/ parallelworldsmusic
> > > www. myspace. com/ interconnectedmusic
> > > www. myspace. com/ memorygeist
> > > www. DiN. org. uk
> > > www. musicamaximamagneti ca. com
> > > www. shimarecords. co. uk
> > > www. rubberrecords. gr
> > > Athens - Greece
> > >
> > > --- On Wed, 12/17/08, Carlos <bushwick@ .> wrote:
> > >
> > > From: Carlos <bushwick@ .>
> > > Subject: [SergeModular] patching VC switch? (combining sequencer
> > rows to get more steps)
> > > To: SergeModular@ yahoogroups. com
> > > Date: Wednesday, December 17, 2008, 7:57 PM
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > Is there a way to patch a VC switch in the current m-class or
with
> > the
> > > regular panels?
> > >
> > > my thinking is that if I had a VC switch in combination with a
> pulse
> > > divider I could send values from the sequencer or sequencer
> > programmer
> > > and extend the number of steps by combining rows together.
(using
> > the
> > > clock into the pulse divider to figure out when is time to
change
> > each
> > > row being input into the switch)
> > >
> > > of course if there is an easier method of doing this I will like
> to
> > > hear it.
> > >
> > > C.
> > >
> >
>