The Scaling Processor has three sections:
1) one input with inverting scale control
one input with unity gain
2) one input with inverting scale control
one input with unity gain
3) two inputs with inverting scale control
one input with unity gain
=/- 5 volt offset control
and... one independent +5 volt reference output
the subsections are configured to be able to cascade into one another so
that you have positive/negative scale control over 4 inputs w/ one output,
or the may be used as three independent sections.
i hope this is of some help.
Bob Roesler
1) one input with inverting scale control
one input with unity gain
2) one input with inverting scale control
one input with unity gain
3) two inputs with inverting scale control
one input with unity gain
=/- 5 volt offset control
and... one independent +5 volt reference output
the subsections are configured to be able to cascade into one another so
that you have positive/negative scale control over 4 inputs w/ one output,
or the may be used as three independent sections.
i hope this is of some help.
Bob Roesler
> From: Alexandros Papadopoulos <Alexmoog@...>
> Reply-To: SergeModular@yahoogroups.com
> Date: Wed, 13 Jun 2001 02:47:51 +0300
> To: <SergeModular@yahoogroups.com>
> Subject: [SergeModular] Scaling processor
>
> Hello
> Does anybody know what are the scaling processor and buffer modules ?
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>