So the 10 v peak to peak voltages of the system you are interfacing with (what was it?) didn’t cause you any problems ? Don’t you have to mix/attenuate all oscillators before interfacing with the Serge? I ask this because Serge is 5V pk.to pk and not all modules have attenuation for audio signals. Maybe I just need more mixers. Thanks!
From:
SergeModular@yahoogroups.com [mailto:SergeModular@yahoogroups.com] On Behalf Of hansgrusel
Sent: Sunday, May 18, 2008 4:05 PM
To: SergeModular@yahoogroups.com
Subject: [SergeModular] Re: Serge
compatiblity
i received my set of mini to banana cables from Rex on
friday and spent the morning
interfacing my creature with my euro rack without a hitch. In fact the serge
creature is a
welcome addition to my euro set up. Highly Recommended! as James mentioned,
only
thing is to make sure you have a common ground. Rex can set you up with this if
you ask.
--- In SergeModular@ yahoogroups. com,
Carbon111 <carbon111@. ..> wrote:
>
I still
> >I am intersted in receiving any information group memebers have regard
> >to success interfacing Serge equipment with that of OTHER
> >MANUFACTURERS. I am most concerned with Serge's 5 volt peak to peak
> >standard and, of course, bananna plugs.
>
> I had no problems whatsoever using my Serge with Dotcom modules (back when
had a Dotcom system) and currently have no issues using my Serge CV and audio
with
various Moog pieces - moogerfoogers, Little Phatty. When I used it with Dotcom
stuff, I
had some Dotcom 1/4"-to-bananna panels. I also have some
1/4"-to-bananna cables that
work just fine.
>
Serge PS to your
> The only critical thing is to have a _common_ground_ . Ground your
MIDI/CV converter or other voltage source, otherwise you won't get proper
triggers/gates.
>
MIDI/cv
> Serge responds just fine to the usual 1v/oct generated by sequencers and
converters without any problems at all.
>
> Best Regards, James
> --
> http://www.carbon11 1.com/serge_ index.html
>