Offering this as a possible clue: The SSG was mentioned in a recent
post about things that can go wrong. Be careful not to patch outputs
to outputs, often you'll get away with it but not always.
See http://launch.groups.yahoo.com/group/SergeModular/message/4726
post about things that can go wrong. Be careful not to patch outputs
to outputs, often you'll get away with it but not always.
See http://launch.groups.yahoo.com/group/SergeModular/message/4726
--- In SergeModular@yahoogroups.com, "legion01x" <legionhwp@...> wrote:
>
>
> Thanks to everyone for the quick and thorough suggestions. I think my
> fears are realized as none of these patches with a trigger or noise or
> anything seem to have any effect on the Stepped section nor do the knob
> do anything even when I go out the coupler output (The knobs modulate
> from the smooth section when going out the coupler).
>
> It's odd that the top section works fine and it's only the Stepped part
> that is out. I'm not about to go poking around in there but if anyone
> has any idea what might be wrong based on what's in these puppies at
> least I'd get an idea of the damage for repair.
>
> I've contacted the seller so we'll see how it all pans out. At least I
> have a few DSGs and a WAD to play with in the meantime :)
>
> Thanks again, this is a great group :)
>
> D_
>