SergeModular

ok, i think i understand;

you just manually adjust the length of each step with row D's pots.
i've used this to get swing and triplets before. i'm curious about
the hold and clock divider method. there is no dedicated clock
divider on this system, is there another module that could function
as one?

thanks a lot,
greg

> set up a nice 8 step sequence, triggering it off the DTG as you

describe.

> you will have a steady rhythm with a note at every step. feed

output D from

> the tkb to the CV input of the DTG and apply a little CV offset pos

or neg.

> depending on the voltages set on line D, the DTG will either speed

up or

> down at that step and then move onto the next one, speed up, etc.

so, to

> set up a simple 4/4 with note-rest-note-note, set up a 3 (yes) step
> sequence with a touch of voltage from step 1 row D (causing DTG to

hold)

> and none on D for 2 and 3. adjust according. you can also try this

type of

> thing with the "hold" input on the tkb and a clock divider.
>
> good luck, hope this helps,
>
> blake, your moderator.
>
> y
>
> >thanks a lot,
> >
> >greg
> >
> >
> >Yahoo! Groups Sponsor
> >ADVERTISEMENT
>
><http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=1

705032144:HM/A=1732161/R=0/SIG=11p5b9ris/*http://www.ediets.com/start.
cfm?code=30509&media=atkins>43821a5d.jpg

> >43821ba4.jpg
> >
> >To unsubscribe from this group, send an email to:
> >SergeModular-unsubscribe@yahoogroups.com
> >
> >Keep on Patchin'!
> >
> >
> >Your use of Yahoo! Groups is subject to the
> ><http://docs.yahoo.com/info/terms/>Yahoo! Terms of Service.
>
> M. Blake Wilson, Esq.
> LAW OFFICES OF M. BLAKE WILSON
> 1532 Sixth Ave.
> San Diego CA 92101
> t:619/234-2200
> f:619/234-2219
> mbwlaw@b...
> http://www.blakewilsonlaw.com