SergeModular

Have you seen the Soup Kitchen shop panel? It sounds close to what
you're talking about.

circlesround wrote:

> Hello,
>
> I'm hoping to construct a stand-alone signal processing unit around
> the STS/Serge 'Frequency Shifter' (FRS) and 'Wilson Analog Delay'
> (WAD) modules, and am in need of some sage advice.
>
> Currently, my neophyte mind has concocted the following;
>
> The foundation:
>
> a) Frequency Shifter + Wilson Analog Delay + Universal Audio
> Processor + Four Adapters (1/4" - 1/8" - banana)
>
> ...but where to go from there.
>
> Two possibilities;
>
> b) Add the following: Sequencer 8x2 + Dual Universal Slope Generator
>
> ...which rapidly brings it to the limit of sixteen spaces. My
> thoughts to include these last two modules would be generation of
> some onboard sequenced (non-random) tones which could thereby be sent
> externally for further processing, or fed directly into the Freq.
> Shifter/Analog Delay for some simple loops to experiment with.
>
>
> c) Otherwise, adding in the following to maintain the original intent
> (processing external audio): Resonant Equalizer + Triple Waveshaper +
> Ring Mod + Dual Phase Shifter
>
> ... which again brings it to sixteen spaces.
>
> Any constructive advice (or critiques) will be sincerely appreciated.
>
> Thanks in advance.
>
> Best wishes -
>
> Trevor
>
>
>
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>