Yahoo Groups archive

SergeModular

Index last updated: 2026-04-28 23:13 UTC

Message

module choice

2003-08-11 by circlesround

Hello,

I'm hoping to construct a stand-alone signal processing unit around
the STS/Serge 'Frequency Shifter' (FRS) and 'Wilson Analog Delay'
(WAD) modules, and am in need of some sage advice.

Currently, my neophyte mind has concocted the following;

The foundation:

a) Frequency Shifter + Wilson Analog Delay + Universal Audio
Processor + Four Adapters (1/4" - 1/8" - banana)

...but where to go from there.

Two possibilities;

b) Add the following: Sequencer 8x2 + Dual Universal Slope Generator

...which rapidly brings it to the limit of sixteen spaces. My
thoughts to include these last two modules would be generation of
some onboard sequenced (non-random) tones which could thereby be sent
externally for further processing, or fed directly into the Freq.
Shifter/Analog Delay for some simple loops to experiment with.


c) Otherwise, adding in the following to maintain the original intent
(processing external audio): Resonant Equalizer + Triple Waveshaper +
Ring Mod + Dual Phase Shifter

... which again brings it to sixteen spaces.

Any constructive advice (or critiques) will be sincerely appreciated.

Thanks in advance.

Best wishes -

Trevor

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.